Avaya WLAN 8100 Series, Справочник, Страница: 191 / 382

Table 39: cli password command parameters
Parameter Description
{read-only | read-write} This parameter specifies if the
password change is for read-only
access or read-write access.
<password> If password security is disabled, the
length can be 1-15 chars. If password
security is enabled, the range for length
is 10-15 chars.
Note:
• no password security
disables password security.
• password security enables
password security.
3. Press Enter.
Setting telnet and serial passwords
About this task
After the read-only and read-write passwords are set, they can be individually enabled or
disabled for the various switch access methods. When enabled, password security prompts
you for a password and the value is hidden. To enable or disable passwords, perform the
following procedure:
Procedure
1. Access CLI through the Telnet protocol or a Console connection.
2. From the command prompt, use the cli password command to enable or disable
the desired password.
cli password {telnet | serial} {none | local | radius |
tacacs}
The following table describes the parameters for this command.
Table 40: cli password parameters
Parameter Description
{telnet | serial} This parameter specifies if the
password is enabled or disabled for
telnet or the console. Telnet and web
access are tied together so that
ACLI reference for wired networks
Avaya WLAN 8100 CLI Reference August 2013 191