manualshive.com logo in svg

Avaya WLAN 8100 Series, Справочник, Страница: 133 / 382

Поделиться
Скачать
Avaya WLAN 8100 Series Скачать руководство пользователя страница 133

  image-update      Configure AP image update related parameters

  reset-group-size  Configure group size for a bulk RESET

WCP8180(config-wireless)#domain auto-promoted-aps ?

  approve  approve all Discovered AP

WCP8180(config-wireless)#domain load-balance

WCP8180(config-wireless-lb)# ?

Load Balance configuration commands

  controller  Controller load balance configuration commands

  default     Set load-balance parameters to default

  end         End configuration mode

  exit        Exit from domain load-balance configuration mode

  lb-metric   Load balance metric for both AP and WSP

  no          Remove AP/WSP lb metrics

WCP8180(config-wireless-lb)#lb-metric ?

  least-load  Load balance to the least loaded device

  location    Load balance to the device in the nearest location(C.B.F.S)

WCP8180(config-wireless)#domain mobility-vlan ?

  WORD  Enter a mobility VLAN name (1-32 chars)

WCP8180(config-wireless)#domain wsp ?

  H.H.H  WSP MAC Address to create/modify a WSP entry in WSP database

About this task

Use this procedure to configure domain options:

Procedure

1. Enter Wireless Configuration mode of the CLI.

2. Use the command 

domain ap-client-qos

 to enable access point QoS

operations for clients.

3. Use the command 

domain ap-reconnection-timeout

 to configure the AP-WCP

failover timeout.

4. Use the command 

domain auto-promote-discovered-ap

 to enable auto

promotion of discovered access points.

5. Use the command 

domain client-roam-agetime <1 - 120>

 to configure

the client roaming timeout value in seconds.

6. Use the command 

domain country-code <country_code>

 to configure a

country code for domain operation.

 Note:

When creating an AP profile, specify a country code or use the default ‘primary’
country code of the domain. To change the country code after you create the AP
profile, you must first delete the AP profile and then create a new profile. Multiple-
country domain names support a maximum of 32 countries.

7. Use the command 

domain tspec-violation-report-interval <0 -

900>

 to configure the TSPEC violators reporting interval in seconds.

ACLI reference for the Wireless LAN (WLAN) 8100

Avaya WLAN 8100 CLI Reference

August 2013     133

Содержание WLAN 8100 Series































































































































































































































































































































































































Отзывы:

Нет отзывов