manualshive.com logo in svg

Avaya WLAN 8100 Series, Справочник, Страница: 101 / 382

Поделиться
Скачать
Avaya WLAN 8100 Series Скачать руководство пользователя страница 101

Use the following sample sequence of commands to create an AP Profile in the

Access-wids

 mode. This AP profile when applied to an AP serves wireless clients

and detects rogues.

ap-profile 2 country-code US

profile-name access-abgn

radio 1 enable

radio 2 enable

radio 1 profile-id 3

radio 2 profile-id 4

exit

3. In the following configuration, the AP exclusively performs WIDS/WIPS functionality

and provides 

no

 service to clients. Here one radio is configured to provide WIDS/

WIPS functionality for the 5GHz band (e.g., 802.11n and 802.11a) and the other is
configured to provide WIDS/WIPS functionality for the 2.4GHz band (e.g., 802.11n
and 802.11b/g). The two radios work simultaneously, which makes this an optimal
WIDS/WIPS configuration.
Use the following sample sequence of commands to create an AP Profile in 

Wids-

Wips

 mode. This AP profile when applied to an AP does not serve wireless clients

but detects and mitigates rogues.

ap-profile 3 country-code US

profile-name wids-2-5

radio 1 enable

radio 2 enable

radio 1 profile-id 5

radio 2 profile-id 6

exit

4. In the following configuration, one of the radios is configured to provide data service

for clients in either the 5GHz band (e.g., 802.11n and 802.11a) or the 2.4GHz band
(e.g., 802.11n and 802.11b/g) and the other dual band radio exclusively performs
the WIDS/WIPS functionality. The advantage of this mode is that the WIDS/WIPS
functionality is not slowed down by data services, because it runs on its own
radio.
Use the following sample sequence of commands to create an AP Profile in the

Mixed

 Mode. This AP profile when applied to an AP serves clients and also detects

and mitigates rogues.

ap-profile 5 country-code US

profile-name mixed

radio 1 enable

radio 2 enable

radio 1 profile-id 7

radio 2 profile-id 4

exit

Configuring WIDS-WIPS

CLI Reference:

WCP8180(config-security)#wids ?

Configure Wireless Intrusion Detection

ACLI reference for the Wireless LAN (WLAN) 8100

Avaya WLAN 8100 CLI Reference

August 2013     101

Содержание WLAN 8100 Series































































































































































































































































































































































































Отзывы:

Нет отзывов