manualshive.com logo in svg

Avaya WLAN 8100 Series, Справочник, Страница: 285 / 382

Поделиться
Скачать
Avaya WLAN 8100 Series Скачать руководство пользователя страница 285

Field

Description

zero indicates forwarding is done immediately without
delay.

ENABLED

Indicates whether DHCP relay is enabled on the
VLAN.

MODE

Indicates the type of DHCP packets this interface
supports. Options include none, BootP, DHCP, and
both.

ALWAYS_BROADCAST

Indicates whether DHCP reply packets are broadcast
to the DHCP client on this VLAN interface.

OPTION_82

Indicates whether option 82 for DHCP relay is enabled
or not.

Displaying DHCP relay counters

About this task

Use this procedure to display the current DHCP relay counters. This includes the number of

requests and the number of replies.

Procedure

To display the DHCP relay counters, enter the following from the User EXEC command
mode:

show ip dhcp-relay counters

Job aid

The following table shows the field descriptions for the 

show ip dhcp-relay counters

command.

Field

Description

INTERFACE

Indicates the interface IP address of the DHCP relay
agent.

REQUESTS

Indicates the number of DHCP requests.

REPLIES

Indicates the number of DHCP replies.

Clearing DHCP relay counters for a VLAN

About this task

Use this procedure to clear the DHCP relay counters for a VLAN.

Procedure

To clear the DHCP relay counters, enter the following from the VLAN Interface
Configuration command mode:

ACLI reference for wired networks

Avaya WLAN 8100 CLI Reference

August 2013     285

Содержание WLAN 8100 Series































































































































































































































































































































































































Отзывы:

Нет отзывов