Avaya WLAN 8100 Series Скачать руководство пользователя страница 38

Страница: 38 / 382

WC8180(config)#wireless

WC8180(config-wireless)#captive-portal tftp-server 172.16.1.11

Procedure

1. Create the constituent HTML files:

• captive_portal_custom.html — which Captive Portal users see on first time

• cp_custom_error.html — which captive-portal users see when authentication

error happens.

• cp_custom_refresh.html — which captive-portal users see when waiting for

authentication results.

Note:

Ensure that you retain the

exact

names of the HTML files. Otherwise the controller

cannot recognize these files and the Captive Portal service will not work.

2. Create a package (

.zip

) file containing the HTML files. If you want to embed images

in your portal page, add appropriate HTML tags (for example,

<img src =

“<filename>”

) in the HTML files and include the graphics files in the zipped

file.

Important:

Ensure the following rules when you create a .zip file.

• The package file must be a zipped file with an extension of

.zip

• The length of package filename must not exceed 31 characters.

• The number of files in the package must not exceed 32.

• The filenames of the files included in the package file must not exceed 31

characters.

• Total package file size does must not exceed 4 Mb and each profile size

must not exceed 8 Mb.

• The zipped file must not contain any directory.

• All files must be in the same directory.

• The image file format is one of

.jpg

.gif

.png

.tif

and

.bmp

• The size of custom images (logo, background, logout image) must not

exceed 1Mb each.

• The image filename does not exceed 31 characters.

3. After creating the

.zip

file, copy the file to a TFTP server to upload it to the AMDC

of the domain.

ACLI reference for Wireless LAN (WLAN) 8100

38 Avaya WLAN 8100 CLI Reference

August 2013

Comments? [email protected]

Содержание WLAN 8100 Series































































































































































































































































































































































































Результаты поиска

Содержание WLAN 8100 Series

Отзывы:

Avaya WLAN 8100 Series, Справочник, Страница: 38 / 382

Результаты поиска

Содержание WLAN 8100 Series

Отзывы: