ABB ACQ80, Руководство по прошивке

Страница: 187 / 390

Parameters 187
36.06 AL2 signal
source
Selects the signal to be monitored by amplitude
logger 2. The signal is sampled at 200 ms
intervals.
The results are displayed by parameters
36.40
…
36.49
. Each parameter represents an amplitude
range, and shows what portion of the samples
fall within that range.
The signal value corresponding to 100% is
defined by parameter
36.07 AL2 signal scaling
.
Amplitude logger 2 can be reset using parameter
36.09 Reset loggers
. The date and time of the last
reset are stored into parameters
36.50
and
36.51
respectively.
For the selections, see parameter
36.01 PVL
signal source
.
Motor
torque
See parameter
36.01
for the selections.
36.07 AL2 signal
scaling
Defines the monitored signal value for the
amplitude logger AL2 that corresponds to 100%
sample value.
100.00
0.00…32767.00 Signal value corresponding to 100%. 1 = 1
36.09 Reset loggers
Resets the peak value logger and/or amplitude
logger 2. (Amplitude logger 1 cannot be reset.)
Done
Done Reset completed or not requested (normal
operation). 0
All Reset both the peak value logger and amplitude
logger 2. 1
PVL Reset the peak value logger. 2
AL2 Reset amplitude logger 2. 3
36.10 PVL peak value
Shows the peak value recorded by the peak value
logger.
0.00
-32768.00…
32767.00 Peak value. 1 = 1
36.11 PVL peak date
Shows the date when the peak value was
recorded. 01/01/
1980
1/1/1980...
6/5/2159 Peak occurrence date. -
36.12 PVL peak time
Shows the time when the peak value was
recorded. 00:00:00
- Peak occurrence time. -
No. Name/Value Description Def/
FbEq16