ABB ACQ80, Руководство по прошивке

Страница: 205 / 390

Parameters 205
46
46 Monitoring/scaling
settings
Speed supervision settings; actual signal
filtering; general scaling settings.
46.01 Speed scaling
Defines the maximum speed value used to define
the acceleration ramp rate and the initial speed
value used to define the deceleration ramp rate
(see parameter group
23 Speed reference ramp
).
The speed acceleration and deceleration ramp
times are therefore related to this value (
not to
parameter
30.12 Maximum speed
).
Also defines the 16-bit scaling of speed-related
parameters. The value of this parameter
corresponds to 20000 in eg. fieldbus
communication.
1500.00
rpm
0.10…
30000.00 rpm
Acceleration/deceleration terminal/initial speed. 1 = 1 rpm
46.02 Frequency
scaling
Defines the maximum frequency value used to
define the acceleration ramp rate and the initial
frequency value used to define deceleration ramp
rate (see parameter group
28 Frequency reference
chain
). The frequency acceleration and
deceleration ramp times are therefore related to
this value ( not to parameter
30.14 Maximum
frequency
.
Also defines the 16-bit scaling of frequency-
related parameters. The value of this parameter
corresponds to
20000 in eg. fieldbus communication.
50.00 Hz
0.10…
1000.00 Hz
Acceleration/deceleration terminal/initial
frequency.
10 = 1 Hz
46.03 Torque scaling
Defines the 16-bit scaling of torque parameters.
The value of this parameter (in percent of
nominal motor torque) corresponds to 10000 in
eg. fieldbus communication.
100.0%
0.1…1000.0% Torque corresponding to 10000 on fieldbus. 10 = 1%
46.04 Power scaling
Defines the output power value that corresponds
to 10000 in eg. fieldbus communication. The unit
is selected by parameter
96.16 Unit selection
.
1000.00
kW or hp
0.10 …
30000.00 kW or
0.10 …
40200.00 hp
Power corresponding to 10000 on fieldbus. 1 = 1 unit
No. Name/Value Description Def/
FbEq16