ABB ACQ80, Руководство по прошивке

Страница: 18 / 390

18 Startup, control with I/O and ID run
How to start up the drive
 How to start up the drive using the First start assistant on the
assistant control panel
Safety
Do not startup the drive unless you are a qualified electrician.
Read and obey the instructions in chapter
Safety instructions
at the beginning of
the
Hardware manual
of the drive. Ignoring the instructions can cause physical injury or
death, or damage to the equipment
Check the installation. See chapter Installation checklist in the Hardware manual of
the drive.
Make sure there is no active start on (DI1 in factory settings, that is, ABB
standard macro). The drive will start up automatically at power-up if the
external run command is on and the drive is in the remote control mode.
Check that the starting of the motor does not cause any danger.
Decouple the driven machine if
• there is a risk of damage in case of an incorrect direction of rotation, or
• a
Normal ID run is required during the drive startup, when the load torque is
higher than 20% or the machinery is not able to withstand the nominal torque
transient during the ID run.
Hints on using the assistant control panel
The two commands at the bottom of the
display ( Options and Menu in the figure on
the right), show the functions of the two
softkeys
and located below the
display. The commands assigned to the
softkeys vary depending on the context.
Use keys
, , and to move the
cursor and/or change values depending on
the active view.
Key shows a context-sensitive help page.
For more information, see
ACS-AP-x
assistant control panels user’s manual
(3AUA0000085685 [English]).
1 – First start assistant guided settings:
Language, date and time, and motor nominal values
Have the motor name plate data at hand.
Power up the drive.
?