ABB ACQ80, Руководство по прошивке

Страница: 273 / 390

Additional parameter data 273
7
Additional parameter data
What this chapter contains
This chapter lists the parameters with some additional data such as their
ranges and 32-bit fieldbus scaling. For parameter descriptions, see chapter
Parameters
(page
79
).
Terms and abbreviations
Term Definition
Actual signal
Signal measured or calculated by the drive. Usually can only be
monitored but not adjusted; some counter-type signals can however be
reset.
Analog src
Analog source: the parameter can be set to the value of another
parameter by choosing “Other”, and selecting the source parameter
from a list.
In addition to the “Other” selection, the parameter may offer other pre-
selected settings.
Binary src
Binary source: the value of the parameter can be taken from a specific
bit in another parameter value (“Other”). Sometimes the value can be
fixed to 0 (false) or 1 (true). In addition, the parameter may offer other
pre-selected settings.
Data
Data parameter
FbEq32
32-bit fieldbus equivalent: The scaling between the value shown on the
panel and the integer used in communication when a 32-bit value is
selected for transmission to an external system.
The corresponding 16-bit scalings are listed in chapter
Parameters
(page
79
).
List
Selection list.
No.
Parameter number.