ABB ACQ80, Руководство по прошивке

Страница: 228 / 390

228 Parameters
Manual In1P
Start; In2 Stop The sources of the start and stop commands are
selected by parameters
79.11 Manual input source
1
and
79.12 Manual input source 2
. The DI selected
by 79.12 Manual input source 2 should be always
On before you start the drive with pulse start
command and during running condition.
The state transitions of the source bits are
interpreted as follows:
2
Fieldbus A The start and stop commands are taken from
fieldbus adapter A. 4
Embedded
fieldbus The start and stop commands are taken from the
embedded fieldbus interface. 5
79.11 Manual input
source 1
Selects source 1 for the parameter
79.10
Operating mode
.
DI1
Not selected 0 (always off). 0
Selected 1 (always on). 1
DI1 Digital input DI1 (
10.02 DI delayed status
, bit 0). 2
DI2 Digital input DI2 (
10.02 DI delayed status
, bit 1). 3
DI3 Digital input DI3 (
10.02 DI delayed status
, bit 2). 4
DI4 Digital input DI4 (
10.02 DI delayed status
, bit 3). 5
DI5 Digital input DI5 (
10.02 DI delayed status
, bit 4). 6
DI6 Digital input DI6 (
10.02 DI delayed status
, bit 5). 7
Timed function
1 Bit 0 of
34.01 Timed functions status
(see page
166
).
8
Timed function
2 Bit 1 of
34.01 Timed functions status
(see page
166
).
9
Timed function
3
Bit 2 of
34.01 Timed functions status
(see page
166
).
10
Other [bit]
Source selection (see
Terms and abbreviations
on
page
80
).
-
79.12 Manual input
source 2
Selects source 2 for the parameter
79.10
Operating mode
. See parameter
79.11 Manual input
source 1
.
DI2
No. Name/Value Description Def/
FbEq16
State of source 1
(
79.11
)
State of source 2
(
79.12
)
Command
0 -> 1 1 Start
Any 0 Stop