ABB ACQ80, Руководство по прошивке

Страница: 20 / 390

20 Startup, control with I/O and ID run
In an edit view:
• Use
and to move the cursor left and
right.
• Use and to change the value.
• Press ( Save ) to accept the new
setting, or press ( Cancel ) to go back
to the previous view without making
changes.
To give the drive a name that will be shown at
the top, press .
If you do not want to change the default
name (ACQ80), continue straight to the set-
up of the motor nominal values by pressing
( Next ).
Enter the name:
• To select the character mode (lower case /
upper case / numbers / special
characters), press
until symbol is
highlighted and then select the mode with
and . Now you can start adding
characters. The mode remains selected
until you select another one.
• To add a character, highlight it with
and , and press .
• To remove a letter, press .
• Press ( Save ) to accept the new
setting, or press ( Cancel ) to go back
to the previous view without making
changes.