ABB ACQ80, Руководство по прошивке

Страница: 266 / 390

266 Parameters
99.07 Motor nominal
voltage
Defines the nominal motor voltage supplied to
the motor. This setting must match the value on
the rating plate of the motor.
Notes :
• With permanent magnet motors, the nominal
voltage is the BackEMF voltage at nominal
speed of the motor. If the voltage is given as
voltage per rpm, e.g. 60 V per 1000 rpm, the
voltage for a nominal speed of 3000 rpm is
3 × 60 V = 180 V.
• The stress on the motor insulation is always
dependent on the drive supply voltage. This
also applies to the case where the motor
voltage rating is lower than that of the drive
and the supply.
• This parameter cannot be changed while the
drive is running.
400.0 V
69.2...830.0 V Nominal voltage of the motor. 10 = 1 V
99.08 Motor nominal
frequency
Defines the nominal motor frequency. This
setting must match the value on the rating plate
of the motor.
Note: This parameter cannot be changed while
the drive is running.
50.0 Hz
0.0…500.0 Hz Nominal frequency of the motor. 10 = 1 Hz
99.09 Motor nominal
speed
Defines the nominal motor speed. The setting
must match the value on the rating plate of the
motor.
Note: This parameter cannot be changed while
the drive is running.
1430 rpm
0…30000 rpm Nominal speed of the motor. 1 = 1 rpm
99.10 Motor nominal
power
Defines the nominal motor power. The setting
must match the value on the rating plate of the
motor. If multiple motors are connected to the
drive, enter the total power of the motors. The
unit is selected by parameter
96.16 Unit selection
.
Note: This parameter cannot be changed while
the drive is running.
0.75 kW
0.00…
10000.00 kW or
0.00…
13404.83 hp
Nominal power of the motor. 1 = 1 unit
No. Name/Value Description Def/
FbEq16