ABB ACQ80, Руководство по прошивке

Страница: 102 / 390

102 Parameters
10.21 RO status
Status of relay outputs RO1…RO3. 0b0000
0b0000...0b1111 Status of relay outputs. 1 = 1
10.22 RO force
selection
The signals connected to the relay outputs can
be overridden for eg. testing purposes. A bit in
parameter
10.23 RO forced data
is provided for
each relay output, and its value is applied
whenever the corresponding bit in this
parameter is 1.
Note: Boot and power cycle reset the force
selections (parameters
10.22
and
10.23
).
0b0000
0b0000...0b1111 Override selection for relay outputs. 1 = 1
10.23 RO forced data
Contains the values of relay outputs that are
used instead of the connected signals if selected
in parameter
10.22 RO force selection
. Bit 0 is the
forced value for RO1.
0b0000
0b0000...0b1111 Forced RO values. 1 = 1
No. Name/Value Description Def/
FbEq16
Bit Value
0 1 = RO1 is energized.
1 1 = RO2 is energized.
2 1 = RO3 is energized.
3…15 Reserved
Bit Value
0 1 = Force RO1 to value of bit 0 of parameter
10.23 RO forced data
.
(0 = Normal mode)
1 1 = Force RO2 to value of bit 1 of parameter
10.23 RO forced data
.
(0 = Normal mode)
2 1 = Force RO3 to value of bit 2 of parameter
10.23 RO forced data
.
(0 = Normal mode)
3…15 Reserved
Bit Value
0 Force the value of this bit to RO1, if so defined in parameter
10.22 RO
force selection
.
1 Force the value of this bit to RO2, if so defined in parameter
10.22 RO
force selection
.
2 Force the value of this bit to RO3, if so defined in parameter
10.22 RO
force selection
.
3…15 Reserved