ABB ACQ80, Руководство по прошивке

Страница: 66 / 390

66 Program features
 Load analyzer
Peak value logger
The user can select a signal to be monitored by a peak value logger. The logger
records the peak value of the signal along with the time the peak occurred, as
well as motor current, DC voltage and motor speed at the time of the peak. The
peak value is sampled at 2 ms intervals.
Amplitude loggers
The control program has two amplitude loggers.
Limit status This view describes any limits currently affecting operation.
If the drive is running at undesired speed, use this view to
find out if any limitations are active.
Active faults This view shows the currently active faults and provides
instructions on how to fix and reset them.
Active warnings This view shows the currently active warnings and provides
instructions on how to fix them.
Active inhibits This view shows up to five simultaneous active start inhibits
and how to fix them.
Fault & event log This view lists the faults, warnings and other events that have
occurred in the drive.
Press
Details to see, for each stored fault, the fault code,
time and values of parameters (actual signals and status
words)
05.80
…
05.88
stored at the time of the fault.
Fieldbus This view provides status information and sent and received
data from fieldbus for troubleshooting.
Load profile This view provides status information regarding load
distribution (that is, how much of the drive's running time
was spent on each load level) and peak load levels.
Menu item Description