ABB ACQ80, Руководство по прошивке

Страница: 190 / 390

190 Parameters
36.46 AL2 60 to 70%
Percentage of samples recorded by amplitude
logger 2 that fall between 60 and 70%. 0.00%
0.00…100.00% Amplitude logger 2 samples between 60 and
70%.
1 = 1%
36.47 AL2 70 to 80%
Percentage of samples recorded by amplitude
logger 2 that fall between 70 and 80%.
0.00%
0.00…100.00% Amplitude logger 2 samples between 70 and
80%. 1 = 1%
36.48 AL2 80 to 90%
Percentage of samples recorded by amplitude
logger 2 that fall between 80 and 90%. 0.00%
0.00…100.00% Amplitude logger 2 samples between 80 and
90%. 1 = 1%
36.49 AL2 over 90%
Percentage of samples recorded by amplitude
logger 2 that exceed 90%. 0.00%
0.00…100.00% Amplitude logger 2 samples over 90%. 1 = 1%
36.50 AL2 reset date
The date on which amplitude logger 2 was last
reset. 01/01/198
0
1/1/1980...6/5/
2159
Last reset date of amplitude logger 2. -
36.51 AL2 reset time
The time at which amplitude logger 2 was last
reset.
00:00:00
- Last reset time of amplitude logger 2. -
40
40 Process PID set 1
Parameter values for process PID control.
The drive output can be controlled by the process
PID. When the process PID control is enabled, the
drive controls the process feedback to the
reference value.
40.01 Process PID
output actual
Shows output of the process PID controller.
This parameter is read-only. -
-200000.00...
200000.00 Process PID controller output. 1 = 1
40.02 Process PID
feedback actual
Shows value of process feedback after source
selection, mathematical function and filtering.
This parameter is read-only. -
-200000.00...
200000.00 Process feedback. 1 = 1
No. Name/Value Description Def/
FbEq16