8-10
IM AQ1300-01EN
MAC Address Table
Select the source MAC address from the MAC Address table.
• Global Address: You can set the source MAC address to a global address.
VLAN Table
Select the VLAN CoS and ID from the VLAN table.
IP Address Table
Select the source IP address from the IP address table.
• Get IP Address: Press this soft key to get the IP address. The AQ1300/AQ1301 will acquire an
IP address, using DHCP when the test layer is L3-IPv4 or stateless address
autoconfiguration when the test layer is L3-IPv6.
Gateway
Set the gateway.
• Manual:
Select this option to set the gateway manually.
• Auto.1:
Select this option to set the gateway to xxx.xxx.xxx.1.
• Auto.254: Select this option to set the gateway to xxx.xxx.xxx.254.
UDP Port Number
Set the test frame's source UDP port number.
Destination Address Setup Screen
Destination MAC Address
Set the destination MAC address. You can refer to the MAC address table to set the address.
IPv4
Set the destination IPv4 address. This setting is valid when Test Layer is set to L3-IPv4 Test. You
can refer to the IP address table or select Search List to set the address.
IPv6
Set the destination IPv6 address. This setting is valid when Test Layer is set to L3-IPv6 Test. You
can refer to the IP address table or select Search List to set the address.
8.3 Configuring Link Address Settings
