9-7
IM AQ1300-01EN
Performing RFC2544 Measurements (AQ1300 Option)
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
16
App
Index
Throughput Test Results Table
The following items are displayed.
• No: This is the test frame length number. If pass/fail judgment is enabled, the pass/fail
judgment results are indicated with colors for each frame length.
Green: Pass
Red: Fail
• Length: Test frame length
• Rate(%): The measured result is displayed as a rate (%).
• Rate(fps): The measured result is displayed as frames per second.
• Rate(bps): The measured result is displayed as bits per second.
Note
• Use the up and down arrow keys to switch the displayed page. If more than seven test frame lengths
are enabled, the first seven frame lengths are displayed on the first page, and the remaining test frame
lengths are displayed on the second page.
• During measurement or for any test frame lengths that have not yet gone through measurement, the
result columns display “----.”
• For any test frame lengths that the throughput measured result could not be obtained for (for example, if a
loss was detected even at the minimum rate), the result columns display “****.”
Switching the Graph Display
You can switch the unit of the measured result graph.
• %: Rate (%)
• fps: Frames per second
• bps: Bits per second
9.3 Displaying Throughput Test Results
