13-25
IM AQ1300-01EN
Y.1564 T
est
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
16
App
Index
When L2 Error is detected
Select whether to stop measurement when an L2 error is detected during measurement.
• Selected: Measurement is stopped when an L2 error is detected.
• Cleared: Measurement is not stopped when an L2 error is detected.
When Fail Result is detected
Select whether to stop measurement when the result of the test currently being performed produces
a fail judgment.
• Selected: Measurement is stopped when the test result produces a fail judgment.
• Cleared: Measurement is not stopped when the test result produces a fail judgment.
Operation after measurement stops
Judge Pass or fail
Select whether to perform pass/fail judgments after measurements finish.
• Selected: Pass/fail judgments are performed after measurements finish.
• Cleared: Pass/fail judgments are not performed after measurements finish.
Note
To perform pass/fail judgments for a particular test, you have to set the pass/fail judgment setting on the
test's setup screen.
Save measurement results
Select whether to save the measurement results to a file after measurement finishes.
• Selected: The measurement results are saved to a file when measurement finishes.
• Cleared: The measurement results are not saved to a file when measurement finishes.
Save measurement logs
Select whether to save the measurement log to a file after measurement finishes.
• Selected: The measurement log is saved to a file when measurement finishes.
• Cleared: The measurement log is not saved to a file when measurement finishes.
Others
Subtract the fixed latency from the result
During latency measurement, the fixed delay that occurs in the other device during loopback is
subtracted from the measured results. The subtracted results are displayed as measurement
results. If the measured value is less than the fixed delay, 0.00 μs is displayed.
• Selected: The fixed delay is subtracted from the measured values.
• Cleared: The fixed delay is not subtracted from the measured values.
Fixed delay value based on the interface
Interface
Delay
XFP
1.0 μs
SFP(GbE)
1.4 μs
SFP(FE)
12 μs
RJ-45(1000M)
1.6 μs
RJ-45(100M)
11 μs
RJ-45(10M)
108 μs
13.7 Configuring Y.1564 Options
