1-41
IM AQ1300-01EN
Features
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
16
App
Index
1.15 Optical Power Measurement (AQ1300 Option)
On models with the /SPML option, when OPM has been selected in the Test menu, you can measure
optical power.
Wavelength range
850, 1300, 1310, 1490, 1550, 1625, 1650 nm
Measurement range
–60 to +10 dBm
Modulation mode
CW, 270 Hz, 1 kHz, 2 kHz
You can select the modulation frequency of the incident rays from a list. You can also
select CW (continuous).
Unit
dB, dBm, W
Reference
You can make the displayed measured value the reference and display subsequent
measured values as relative values.
Zero Set
You can adjust the internal deviation of the optical power measurement section and obtain
more accurate absolute optical power values.
Average Count
You can display averaged measured values.
Max/Min Value Display You can display the maximum and minimum measured values.
Offset
You can add a specified value (the offset value) to measured optical power values.
Threshold Value
You can set upper and lower threshold values and determine whether or not the measured
values fall within them.
