6-30
IM AQ1300-01EN
6.7 Configuring a QoS Test
Procedure
QoS Setup Screen
Follow the procedure in section 6.4 to display the QoS Setup screen.
Tx Frame Setting Screen
Press the
Detail Setup
soft key and then the
Tx Frame Setting
soft key to display the following
screen.
Set the offset (byte 0-255).
This setting is valid when Manual is
selected.
Set the payload check offset
(Use Tx CH1 setting, Manual).
Select the QoS channels that you want
to send.
Set the CH1 Tx rate.
Configure frame length adjustment.
►section 6.5
Configure the frames.
Frame structure indication
Total Tx rate indication
Frame length and actual length
indications
Set the Tx rate
(0.00000-100.00000%).
CH1 Tx Rate Setting Screen
Press Detail under Tx Rate. The following screen appears.
Set the traffic format
(Constant, Burst).
Set the Tx rate
(0.00001-100.00000%).
This setting is valid when the traffic format
is set to Constant.
Set the burst
(Burst Number, Burst Time).
This setting is valid when the traffic format
is set to Burst.
Set the burst number
(1-65535).
This setting is valid when Burst Setting is
set to Burst Number.
Set the burst time
(1-1000000 us, 1-1000 ms).
This setting is valid when Burst Setting is
set to Burst Time.
Set the interval
(1-1000000 us, 1-1000 ms).
