7-10
IM AQ1300-01EN
7.3 Changing the Tx Rate
Procedure
Follow the procedure in section 7.1 to start measurement and transmission for a traffic, QoS, or BER
test.
Press the
Special Control
soft key and then the
Tx Rate Change
soft key to display the following
screen.
Example When a QoS Test Is Being Performed
Specify the target QoS channel.
This setting is valid when you are
performing a QoS test.
Returns the Tx rates to their original
settings
Set the Tx rate.
Explanation
Target
Specify the QoS channel whose rate you want to change. This setting is valid when you are
performing a QoS test.
CH1 to CH8 (Manual)
CH1 to CH4 (Auto, Auto(Remote))
Tx Rate
Set the Tx rate.
Range: 0-100.00000%
Note
During a QoS test, you can change the Tx rates of the channels selected in the QoS transmission settings.
Default
Press this soft key to return the Tx rates to their original settings.
