12-22
IM AQ1300-01EN
12.10 Executing an LT and Multicast LB
Procedure
Executing an LT
Follow the procedure in section 12.8 to select LB test or section 12.9 to select CC test, and press
STOP
. The LT execution screen appears.
Press the
Special
soft key and then the
LinkTrace(LT)
soft key to display the following screen.
Next page
1/4 to 4/4
Stops a link trace
Save to file
►
section 13.2
Starts a link trace
When the measurement is completed successfully or with an error or when the measurement is
forcibly stopped, the following screen appears.
Status
(Unexecution, Executing.., Success!, Error(Hop Count Over),
Error(Route Error), Error(Target Unreachable), Cancel..)
Events
(No.: Hop number; Source MAC Address;
connected device type)
The number of hops performed in the test
Measurement Result Display (Success example)
Assigns the source MAC address of the
selected event to the destination MAC
address of the LB or CC test
