4-25
IM AQ1300-01EN
Automatic T
est Settings (Auto)
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
16
App
Index
Explanation
PING Setup Screen
When Test Layer Is Set to L3-IPv4 Test or L3-IPv6 Test
Destination IPv4 or IPv6 Address
“Use Destination Address” Check Box (Always selected)
The destination IPv4 or IPv6 address in the address settings is used (fixed). To specify a different
destination IPv4 address, clear this check box.
Source IPv4 or IPv6 Address
The source IPv4 or IPv6 address from the address settings is used (fixed).
When Test Layer Is Set to L2 Test
Each address is set automatically from the MAC address.
Destination IPv4 address:
10.lower three bytes of the destination MAC address
Source IPv4
Address: 10.lower three bytes of the source MAC address
Netmask: 255.0.0.0 (fixed)
Gateway: 0.0.0.0 (fixed).
Transmission Interval
Set the interval at which to send ping requests.
1 ms, 10 ms, 100 ms, 1 s
The timeout value is 1 second.
Tx Mode, Frame Length (Actual), Tx Time Table, Frames Table, and Frame Length
Table
These are the same as the settings for a traffic test. For details, see section 4.5.
4.8 Configuring a Ping Test
