6-44
IM AQ1300-01EN
Source IPv4 or IPv6 Address
Set the source IPv4 or IPv6 address, the subnet mask (1 to 31), and the gateway.
When Test Layer Is Set to L2 Test
Each address is set automatically from the MAC address.
Destination IPv4 address:
10.lower three bytes of the destination MAC address
Source IPv4
Address: 10.lower three bytes of the source MAC address
Netmask: 255.0.0.0 (fixed)
Gateway: 0.0.0.0 (fixed).
TX Setting
Frame Length and Actual Length
Set the Tx frame length. The actual frame length that corresponds to the length you set is also
displayed.
VLAN
L2 and L3-IPv4
L3-IPv6
None
64(64) to 9999(9999) bytes
84(84) to 9999(9999) bytes
1
64(68) to 9999(9999) bytes
84(88) to 9999(9999) bytes
2
64(72) to 9999(9999) bytes
84(92) to 9999(9999) bytes
Tx Mode
Set the Tx mode.
• Continuous: In this mode, frames are transmitted continuously. After you start transmission, it
continues until you stop it.
• Frames:
In this mode, a specified number of frames is transmitted. After you start
transmission, the specified number of frames is sent, and then transmission is
stopped automatically.
• Time:
In this mode, frames are transmitted for a specified period of time. After you start
transmission, it continues for the specified period of time and is then stopped
automatically.
Frames
When Tx Mode is set to Frames, set the number of frames.
Range: 1 to 4,294,967,295
Tx Time
When Tx Mode is set to Time, set the Tx time.
Range: 1 to 86400 s
Transmission Interval
Set the interval at which to send ping requests.
1 ms, 10 ms, 100 ms, 1 s
Timeout
Specify the ping timeout period.
100 ms, 1 s
6.8 Configuring a Ping Test
