67
If [SMTP] has been selected for the [Mail Receiving Protocol]
Aliases cannot be configured. A user can decide an account name (the left side of the @ mark). An
address (the right side of the@ mark) is a combination of a host name and a domain name.
Example: [email protected]
•
Account name : mymail
•
Host name : myhost
•
Domain name : example.com
If [POP3] has been selected for the [Mail Receiving Protocol]
Specify a POP user name to an account name (the left side of the @ mark), and a POP3 receiving
mail server to an address (the right side of the @ mark). A user can decide an alias such as
[email protected].
Example: [email protected]
Account name : mymail
3.
Set the protocol for receiving E-mail.
a.
From the Connectivity & Network Setup list, select
Other Settings
.
b.
Select
E-mail Receive Protocol
and then select
Change Settings
.
c.
Select either
SMTP
or
POP3
as appropriate for your environment.
d.
Select
Save
.
e.
Select Close.
If [SMTP] has been selected for the [Mail Receiving Protocol]
a.
From the Connectivity & Network Setup list, select
Outgoing/Incoming
(i.e. E-mail Send/Receive
Settings).
b.
Select
SMTP Server Settings
and then set the following items for the SMTP server.
[SMTP Server Port Number]
Enter a value in the range from 1 to 65535. The default is 25.
If [POP3] has been selected for the [Mail Receiving Protocol]
a.
From the Connectivity & Network Setup list, select
Outgoing/Incoming
(i.e. E-mail Send/Receive
Settings).
b.
Select
POP3 Server Settings
and then set the following items for the POP3 server.
[POP3 Server Name/Address]
Enter the POP3 Server Name/IP Address and press
Save
.
Note: Enter the address in the format “xxx.xxx.xxx.xxx”. The “xxx” should be a numeric value in the
range from 0 to 255. However, 224 – 255.xxx.xxx.xxx and 127.xxx.xxx.xxx cannot be used.
Summary of Contents for WorkCentre 7300 Series
Page 1: ...System Administrator s Guide 701P47983 WorkCentre 7300 Series ...
Page 12: ...x ...
Page 203: ......