79
Communications modes:
•
G3 (Auto) - Normal Fax communications. The machine automatically switches modes in the following
order of priority: Unique SG3 - Unique ECM - Unique G3 - ITU-T SG3 - ITU-T ECM - ITU-TG3
depending on the capabilities of the remote terminal.
•
F4800 - Select this mode when transmitting over noisy or bad telephone lines, as can be the case with
overseas calls.
Connecting the phone line:
LINE 1 Connect the fax to a public switched telephone network (PSTN). An external telephone cannot be
connected.
TEL An external telephone is connected here.
LINE 2 (Line 2) Connect to a public line.
LINE 4 (Line 4) Connect to a public line.
Local Terminal Information Settings
1.
Press the
Log In / Out
button to enter System Administration Mode.
2.
On the keypad enter [11111] or current password. Touch
Enter
when finished.
3.
Press the
Machine Status button
on the Control Panel.
4.
Touch the
Tools tab
.
5.
Touch
Fax Mode Settings
.
6.
Touch
Local Terminal Information
.
7.
Select the items to enter information and touch
Change Settings
.
a.
Enter in a Local Name, up to 20 characters, then touch
Save
.
b.
Enter a Company Logo, up to 30 characters, then touch
Save
.
c.
Enter a Machine Password, up to 20 digits, then touch
Save
. Note:
The password prevents your
machine from receiving faxes, or being polled by other machines that are not F-Code compatible.
d.
Enter G3 Fax ID, up to 20 digits, then touch
Save
.
e.
Enter G3 Dial Type, Tone, 10pps, or 20pps, then touch
Save
.
f.
Enter G3 Line Type, PSTN or PBX, then touch
Save
.
8.
When complete, touch
Close
repeatedly until the Tools tab screen is displayed.
9.
Wait several seconds for the Auto Clear service to log you out.
Summary of Contents for WorkCentre 7300 Series
Page 1: ...System Administrator s Guide 701P47983 WorkCentre 7300 Series ...
Page 12: ...x ...
Page 203: ......