manualshive.com logo in svg

Xerox WorkCentre 7300 Series, Administrator'S Manual

The Xerox WorkCentre 7300 Series Troubleshooting Manual is a comprehensive user resource designed to address any issues you may encounter with this exceptional product. This manual can be easily downloaded for free from manualshive.com, ensuring prompt resolution for any technical difficulties you may experience.

Share
Download
background image

v

Using with SMB.............................................................................................................................. 92

Adding the Receiving Computer’s Address to the Address Book ....................................................... 92
Using the Scan to PC (FTP/SMB) Feature.......................................................................................... 93

Setup and Use of Job Flow Sheets with Mailboxes .......................................................................... 94

Overview ............................................................................................................................................. 94

Features supported for Job Flow ..................................................................................................... 94

Enabling Ports and Setting TCP/IP ..................................................................................................... 95
Configuring the SNMP Port ................................................................................................................. 96
Creating Job Flow Sheets ................................................................................................................... 97
Creating a Mailbox and linking to a Job Flow Sheet (for automatic processing)................................. 98
Manually linking a Job Flow Sheet to documents in a Mailbox ........................................................... 99
Testing Job Flow Sheet operation (for automatic processing) ............................................................ 99

Scan to PC Desktop ........................................................................................................................... 100

Overview ........................................................................................................................................... 100
Preparations ...................................................................................................................................... 100
Software Installation Procedure ........................................................................................................ 100
Configure Image Retriever 5.2 on Networked Workstations ............................................................. 100
Testing Scan to PC Operation........................................................................................................... 100

Network Scanning (using templates) ............................................................................................... 101

Overview ........................................................................................................................................... 101

SMARTsend scanning services..................................................................................................... 101
Scan to PC Desktop ...................................................................................................................... 101

Additional Notes ................................................................................................................................ 101

Network Scanning User Authentication ......................................................................................... 101
Multifunction Device Authentication............................................................................................... 101
Template Considerations when using SMARTsend ...................................................................... 101
Use of a Validation Server ............................................................................................................. 102

Installation Checklist.......................................................................................................................... 102
Configure a Scan Filing Location ...................................................................................................... 102

Configure a Scan Filing Repository using FTP ............................................................................. 103
Installation Checklist ...................................................................................................................... 103
Enter the Scan Repository Details via Internet Services ...............................................................103

Configure General Settings ........................................................................................................ 103

Configure a Scan Filing Repository using SMB ............................................................................ 104
Installation Checklist ...................................................................................................................... 104
Enter the Scan Repository Details via Internet Services ...............................................................104

Configure General Settings ........................................................................................................ 104

Configure Scan to HTTP ............................................................................................................... 105
To configure the Scan Repository Details using CentreWare Internet Services: .......................... 105
Setting up a Remote Template Pool Repository (optional) ........................................................... 106

Configuring the Default Template with Internet Services .................................................................. 107
Setting up a Remote Template Pool Repository (optional) ...............................................................108
Testing Network Scanning (using templates).................................................................................... 109

Web Service (if available)................................................................................................................... 109

Enable the WebDAV port (for name space management) ................................................................ 109

Security – Authentication .................................................................................................................. 110

Overview ........................................................................................................................................... 110

Users Controlled by Authentication ............................................................................................... 110
Authentication Configuration and related Types............................................................................ 110

Services Managed by User ID Authentication................................................................................... 111

When Local Machine Access is enabled ....................................................................................... 111
When Network Access is enabled .................................................................................................111
When Remote Access is enabled..................................................................................................111

Effects of Authentication on Job Flow Sheets and Mailboxes........................................................... 112
Configuring Local machine authentication ........................................................................................ 112

Preparations: ................................................................................................................................. 112

Summary of Contents for WorkCentre 7300 Series












































































































































































































Reviews:

No comments

Related manuals for WorkCentre 7300 Series

Panasonic FP-D350 Manual preview
FP-D350
Brand: Panasonic Pages: 83
EASYPRINT Compact CM User Documentation preview
Compact CM
Brand: EASYPRINT Pages: 37
Xerox DocuPrint C525 A Quick Reference Manual preview
DocuPrint C525 A
Brand: Xerox Pages: 49
Xerox DocuPrint C2100 Quick Reference Manual preview
DocuPrint C2100
Brand: Xerox Pages: 206
Xerox DocuPrint 96 Installation Planning Manual preview
DocuPrint 96
Brand: Xerox Pages: 116
Xerox DocuPrint 96 Message Manual preview
DocuPrint 96
Brand: Xerox Pages: 358
Xerox DocuPrint 4635 Operator'S Manual preview
DocuPrint 4635
Brand: Xerox Pages: 344
Xerox DocuPrint 205 Operation Manual preview
DocuPrint 205
Brand: Xerox Pages: 59
Xerox DocuPrint 900 Product Safety Data Sheet preview
DocuPrint 900
Brand: Xerox Pages: 2
Xerox C230 Quick Reference Manual preview
C230
Brand: Xerox Pages: 10
Xerox DocuPrint 180 Maintenance Manual preview
DocuPrint 180
Brand: Xerox Pages: 51
Xerox DocuPrint 180 Solution Manual preview
DocuPrint 180
Brand: Xerox Pages: 110
Xerox 7300DX - Phaser Color Laser Printer Overview preview
7300DX - Phaser Color Laser Printer
Brand: Xerox Pages: 8
Xerox 8400B - Phaser Color Solid Ink Printer Reference Manual preview
8400B - Phaser Color Solid Ink Printer
Brand: Xerox Pages: 203
Xerox 3150 - Phaser B/W Laser Printer Product Data Sheet preview
3150 - Phaser B/W Laser Printer
Brand: Xerox Pages: 2
Xerox 3117 - Phaser B/W Laser Printer Upgrade Instructions preview
3117 - Phaser B/W Laser Printer
Brand: Xerox Pages: 8
Xerox C8 - DocuPrint Color Inkjet Printer System Administration Manual preview
C8 - DocuPrint Color Inkjet Printer
Brand: Xerox Pages: 148
Xerox 1235DT - Phaser Color Solid Ink Printer Service Manual preview
1235DT - Phaser Color Solid Ink Printer
Brand: Xerox Pages: 239

Brands by name

Popular brands

Load more brands