109
Testing Network Scanning (using templates)
1.
Go to the machine and press the
All Services button
.
2.
Press the
Network Scanning
button.
3.
See if the template you created is displayed on screen.
4.
If it is, press it. If it is not, return to the beginning of this section and repeat the required procedures.
5.
Place a document in the document handler and press the
Start button
located to the immediate right
of the Control Panel’s numeric keypad.
6.
On a network-connected PC, open a connection to the repository server, log in, and see if the
document arrived in the repository folder.
Web Service (if available)
The Web Service button on the machine, if available, enables users to view Internet or Intranet web
servers on the machine’s User Interface, and to send scanned files to web servers through job flow sheets,
if the server login and password are valid as entered on the job flow sheet. In addition to performing the
set up procedure described here, make sure to refer to the
Proxy Server Settings
topic, in the
Network
Connectivity
section of this guide, for instructions on setting up Proxy Server parameters (similar to
setting up connections for a standard web browser). To set up and use Job Flow Sheets with Mailboxes,
refer to that topic in the Options section of this guide.
1.
Press the
Log In / Out
button to enter System Administration Mode.
2.
On the keypad enter [11111] or the current password. Touch
Enter
when finished.
3.
Press the
Machine Status button
on the Control Panel, then touch the
Tools tab
.
4.
Use the arrow control in the
Group
menu to scroll to
Web Browser Setup
.
5.
Touch
Web Browser Setup
.
6.
Touch
Access to Web Sites
, then touch
Change Settings
.
7.
Touch
Enabled
, then touch
Save
.
8.
Select any other settings of interest and use the
Change Settings
and
Save
buttons, as required.
9.
Touch
Close
to return to the Tools tab screen.
Enable the WebDAV port (for name space management)
1.
Use the arrow control in the
Group
menu.
2.
Touch
Connectivity & Network Setup
.
3.
Touch
Port Settings
.
4.
Scroll to
WebDAV
, touch the selection line, then touch
Change Settings
.
5.
Touch
WebDAV – Port Status
, then touch
Change Settings
.
6.
Touch
Enabled
, then touch
Save
.
7.
Touch
Close
repeatedly until the Tools tab screen is displayed, then wait for the Auto Clear service to
reboot the machine.
8.
Return to the WebDAV settings screen and verify that the
Port Number
is set to 80 and that a
Timeout
value (30 or more seconds) has been set.
9.
Make any changes desired, then touch
Close
repeatedly until the Tools tab screen is displayed.
10. Wait several seconds for the Auto Clear service to log you out.
Summary of Contents for WorkCentre 7300 Series
Page 1: ...System Administrator s Guide 701P47983 WorkCentre 7300 Series ...
Page 12: ...x ...
Page 203: ......