manualshive.com logo in svg

Xerox WorkCentre 7300 Series, Administrator'S Manual

The Xerox WorkCentre 7300 Series Troubleshooting Manual is a comprehensive user resource designed to address any issues you may encounter with this exceptional product. This manual can be easily downloaded for free from manualshive.com, ensuring prompt resolution for any technical difficulties you may experience.

Share
Download
background image

149

Media Card Reader

Overview

The Media Card Reader is available as an optional kit for the WorkCentre 7300 Series.

If the Media Card Reader is installed on the WorkCentre 7300 Series, image data (Exif) taken by digital 
cameras and document files (PDF, TIFF) can be printed by the WorkCentre 7300 Series.

For further information, refer to the 

Media Card Reader User Guide

.

Note: “Exif” is a file format that embeds information required to print data in an image taken by digital 
cameras.

The WorkCentre 7300 Series uses two media printing modes:

•

Media Print – Text – prints data stored in document format. It is helpful to think of the word “text” as 
synonymous with “document.”

•

Media Print – Photos – prints data stored in the standard format of most digital cameras.

Media Card Reader Hardware

•

Access Indicator – this light illuminates when the media card is inserted.

•

Eject Button – press this button to eject the media card.

•

Media Slot – insert the media card into this slot.

Supported Media and File Formats

The Media Card Reader supports 

CompactFlash 

media only. To use media other than CompactFlash, 

insert the media into a CompactFlash adaptor.

Note: The media and the CompactFlash adaptor are optional.

The media and file formats that can be used are as follows.

Supported Media

•

SmartMedia

•

CompactFlash

•

CompactFlash 

(MicroDrive)

•

SD Card

•

Memory Stick

•

xD-Picture Card

Supported File Formats

•

Media Print - Photos

•

JPEG

•

TIFF - DCF1.0-compliant JPEG/TIFF (Exif2.0, Exif2.1, Exif2.2) are supported.

•

Media Print - Text

•

PDF Extension: .pdf, PDF1.3 or later

•

TIFF Extension: .tif, gray scale 4 bit/8 bit uncompressed, 4 bit/24 bit compressed by JPEG, 
compressed by MH/MMR

Summary of Contents for WorkCentre 7300 Series












































































































































































































Reviews:

No comments

Related manuals for WorkCentre 7300 Series

IBM 24 Installation Instruction preview
24
Brand: IBM Pages: 16
VASTEX V-100 Manual preview
V-100
Brand: VASTEX Pages: 15
Ricoh Aficio SP4100N-KP Specifications preview
Aficio SP4100N-KP
Brand: Ricoh Pages: 4
B-G Instruments PM1416 Quick Start Manual preview
PM1416
Brand: B-G Instruments Pages: 2
Olivetti d-Copia 16MF User Manual preview
d-Copia 16MF
Brand: Olivetti Pages: 132
Skynet SoonMark M8 User Manual preview
SoonMark M8
Brand: Skynet Pages: 18
Kyocera ECOSYS M3860idn Operation Manual preview
ECOSYS M3860idn
Brand: Kyocera Pages: 483
L-Mark LK-330E User Manual preview
LK-330E
Brand: L-Mark Pages: 62
Kyocera ECOSYS M2135dn Operation Manual preview
ECOSYS M2135dn
Brand: Kyocera Pages: 410
Oki MAC TECHNICAL REFERANCE C7350 User Manual preview
MAC TECHNICAL REFERANCE C7350
Brand: Oki Pages: 95
GALLERY 1390R User Manual preview
1390R
Brand: GALLERY Pages: 10
WOOSIM PORTI-SP20 Operation Instructions Manual preview
PORTI-SP20
Brand: WOOSIM Pages: 20
WOOSIM PORTI-S Operator'S Manual preview
PORTI-S
Brand: WOOSIM Pages: 56
SATO FX3-LX Driver Manual preview
FX3-LX
Brand: SATO Pages: 100
Lexmark X792 Release Note preview
X792
Brand: Lexmark Pages: 4
SEWOO SLK-T21EB Series User Manual preview
SLK-T21EB Series
Brand: SEWOO Pages: 12
Sewhacnm SE7300 SD Manual preview
SE7300 SD
Brand: Sewhacnm Pages: 6
SEWOO LK-P12W User Manual preview
LK-P12W
Brand: SEWOO Pages: 13

Brands by name

Popular brands

Load more brands