manualshive.com logo in svg

Xerox WorkCentre 7300 Series, Administrator'S Manual, Page: 29 / 203

Share
Download
Xerox WorkCentre 7300 Series Administrator'S Manual Download Page 29

17

6.

Download the software file:

a.

Obtain the new software upgrade file (Controller ROM or Cont PS ROM) for your machine 
from the www.xerox.com web site, or from your Xerox Customer Support Representative. 

b.

Download the upgrade file to a local or network drive. 

 

You will be able to delete the file after the upgrade procedure.

c.

Extract the .bin file from the .zip archive.

At your workstation

1.

Verify that the machine is up and running, and is not in PowerSaver mode.

2.

Open your web browser and enter the TCP/IP address of the machine in the Address or Location field, 
then press [Enter].

3.

Click the [Properties] tab.

4.

Click the [Services] folder.

5.

Click the [Machine Software] folder.

6.

In the [Machine Software] folder:

a.

Click [Upgrades]. Click or verify the Enabled check box, then click [Apply].

b.

Click [Manual Upgrade]. Click [Browse] and move through your file system to the new software. 
Click [Install Software] to install the software.

Note: The Manual Upgrade link provides the ability to upgrade software manually, after enabling 
through the Upgrades link.

Summary of Contents for WorkCentre 7300 Series












































































































































































































Reviews:

No comments