13
To Change the Alphanumeric Password used by Internet Services
Note: If Authentication is enabled, as stated in the Security – Authentication topic in the Options
section of this guide, you will have to supply the Administrator User Name and Password when first
accessing Internet Services, rather than supplying these credentials after configuring individual
features with Internet Services.
1.
Press the
Log In / Out button
on the Device’s Control Panel.
2.
Press the
"1" key
on the numeric keypad five consecutive times. This is the factory default
"password."
3.
Press
Enter
on the touch screen.
4.
Press the
Machine Status button
on the Control Panel.
5.
Press the
Tools tab
.
6.
Press
Authentication/Security Settings
.
7.
Press
System Administrator Settings
.
8.
Press
System Administrator Passcode
.
9.
Press the keyboard button, and use the displayed keyboard to enter in a new alphanumeric password
ranging from 4 to 12 characters in length.
10. Press the
Save
button.
11. Press the keyboard button, and use the displayed keyboard to enter in your new password a second
time and press
Save
again.
12. Press
Save
on the Password screen to save the new password.
13. If necessary, to exit the System Administrator Settings screen, press the rectangular
Close
button in
the upper right corner of the screen.
14. Wait several seconds and the Auto Clear service should log you out.
Summary of Contents for WorkCentre 7300 Series
Page 1: ...System Administrator s Guide 701P47983 WorkCentre 7300 Series ...
Page 12: ...x ...
Page 203: ......
