manualshive.com logo in svg

Xerox WorkCentre 7300 Series, Administrator'S Manual

The Xerox WorkCentre 7300 Series Troubleshooting Manual is a comprehensive user resource designed to address any issues you may encounter with this exceptional product. This manual can be easily downloaded for free from manualshive.com, ensuring prompt resolution for any technical difficulties you may experience.

Share
Download
background image

96

Note: Enter the address in the format “xxx.xxx.xxx.xxx”. The "xxx" should be a numeric value in the 
range from 0 to 255. However, 224 - 255.xxx.xxx.xxx and 127.xxx.xxx.xxx cannot be used.

f.

Select 

Save

.

g.

Configure 

TCP/IP – Subnet Mask

 and 

TCP/IP – Gateway Address

 using the same process as 

stated above.

Note: Enter the Gateway address in the format “xxx.xxx.xxx.xxx”. The "xxx" should be a numeric value 
in the range from 0 to 255. However, 224 - 255.xxx.xxx.xxx and 127.xxx.xxx.xxx cannot be used.

Note: Specify the subnet mask by a combination of the numbers 0, 128, 192, 224, 240, 248, 252, 254, 
and 255. However, you cannot use 0 between non-zero values.

If you do not set the gateway address, enter "0.0.0.0".

5.

Select 

Close

 until the Tools tab screen is displayed.

6.

Wait several seconds for the Auto Clear service to log you out.

7.

If you changed any settings, the Device will automatically reboot to register and enable your new 
settings.  After the machine is restarted, print out a Configuration Report to confirm that the ports are 
enabled and TCP/IP is correctly configured.

For information on how to print a Configuration Report, refer to the Configuration Report topic in the 
Network Connectivity section of this guide.

Configuring the SNMP Port

Configure the transport protocol for the SNMP port using CentreWare Internet Services.

1.

Start a web browser on a network connected workstation.

2.

Enter the machine’s IP address in the address box of the browser and press 

Enter

.

3.

Click the 

Properties

 tab.

4.

Click 

Port Status

.

5.

Select (place a checkmark in) the UDP check box next to SNMP.

6.

Click 

Apply

.

7.

Enter the System Administrator user ID and password when prompted and click 

OK

.

8.

Click the 

Reboot button

 when it displays.  If a Reboot button fails to display, click the Status tab and 

click Reboot Machine from that screen.

Summary of Contents for WorkCentre 7300 Series












































































































































































































Reviews:

No comments

Related manuals for WorkCentre 7300 Series

Oki C910 Troubleshooting Manual preview
C910
Brand: Oki Pages: 33
Oki C910 Service Training preview
C910
Brand: Oki Pages: 52
Oki C910 Manual preview
C910
Brand: Oki Pages: 11
OKIDATA 120 Handbook preview
120
Brand: OKIDATA Pages: 58
Xerox 220 Getting Started preview
220
Brand: Xerox Pages: 48
Oce 3155 System Data preview
3155
Brand: Oce Pages: 4
Pantum P3060 SERIES Manual preview
P3060 SERIES
Brand: Pantum Pages: 115
Oki MPS480mb Manual De L'Utilisateur preview
MPS480mb
Brand: Oki Pages: 197
Lanier LD160c Brochure & Specs preview
LD160c
Brand: Lanier Pages: 6
Oki MPS6500b User Manual preview
MPS6500b
Brand: Oki Pages: 132
SEWOO SLK-TS100 User Manual preview
SLK-TS100
Brand: SEWOO Pages: 8
Xerox DocuColor 7002 Safety Manual preview
DocuColor 7002
Brand: Xerox Pages: 18
Wasp WPL606 Quick Start Manual preview
WPL606
Brand: Wasp Pages: 2
Konica Minolta bizhub C350 Installation Manual preview
bizhub C350
Brand: Konica Minolta Pages: 12
Canon TS7400 Series Getting Started preview
TS7400 Series
Brand: Canon Pages: 76
Epson AcuLasaer C1900 Quick Reference Manual preview
AcuLasaer C1900
Brand: Epson Pages: 17
Epson 3880 - Stylus Pro Color Inkjet Printer Specifications preview
3880 - Stylus Pro Color Inkjet Printer
Brand: Epson Pages: 2
Epson AcuLaser CX11NF Fax Manual preview
AcuLaser CX11NF
Brand: Epson Pages: 64

Brands by name

Popular brands

Load more brands