manualshive.com logo in svg

Xerox WorkCentre 7300 Series, Administrator'S Manual

The Xerox WorkCentre 7300 Series Troubleshooting Manual is a comprehensive user resource designed to address any issues you may encounter with this exceptional product. This manual can be easily downloaded for free from manualshive.com, ensuring prompt resolution for any technical difficulties you may experience.

Share
Download
background image

146

To Restore Settings or Clone Settings to another Machine

Note: This procedure will cause the machine to reboot and will be unavailable over the network for 
several minutes.

Note: All machines must have the same version of software for the .dat file to be accepted

1.

Open your web browser and enter the TCP/IP address of the machine that you wish to restore or clone 
the settings to. Press 

Enter

.

2.

Click the 

Properties

 tab.

3.

Click the 

General Setup

 folder, then 

Cloning

.

4.

In the 

Cloning

 area, in the 

Install Clone File

 box:

a.

Click 

Browse

 and move through your file system to the .dat file.

b.

Click 

Open

.

c.

Click 

Install

.

5.

If prompted, enter the current administrator User name and password. The default is 11111 and x-
admin.

Note: The machine will be unavailable over the network for several minutes. 

6.

Once rebooted a Configuration Report should automatically print, if enabled.  If the Configuration 
Report does not automatically print, manually print the list by referring to the instructions in the 
Configuration Report topic in the Network Connectivity section of this guide.  Looking at the 
Configuration Report, verify that some or all of your settings have been cloned to the new machine.  
Also, note that it may be necessary for you to use your web browser to view the Xerox Standard 
Accounting set up of Users and Groups on the new machine.

Summary of Contents for WorkCentre 7300 Series












































































































































































































Reviews:

No comments

Related manuals for WorkCentre 7300 Series

IBM 3130 Planning Manual preview
3130
Brand: IBM Pages: 112
NEC 870 - SuperScript B/W Laser Printer Network User'S Manual preview
870 - SuperScript B/W Laser Printer
Brand: NEC Pages: 52
NEC SuperScript 1800 Quick Start Manual preview
SuperScript 1800
Brand: NEC Pages: 8
Xerox 220 Quick Install Manual preview
220
Brand: Xerox Pages: 8
Oki B411d Guía Del Usuario preview
B411d
Brand: Oki Pages: 154
Oki ML320 Turbo Manual Do Utilizador preview
ML320 Turbo
Brand: Oki Pages: 121
Oki B4100 Guía Del Usuario preview
B4100
Brand: Oki Pages: 96
Canon PIXMA MX892 Getting Started Manual preview
PIXMA MX892
Brand: Canon Pages: 4
Ricoh SP150 series Setup Manual preview
SP150 series
Brand: Ricoh Pages: 2
Oki OKIFAX 5050 Specification Sheet preview
OKIFAX 5050
Brand: Oki Pages: 2
GCC Technologies JV-240UV User Manual preview
JV-240UV
Brand: GCC Technologies Pages: 97
Valentin Compa II Series Operating Manual preview
Compa II Series
Brand: Valentin Pages: 110
Parkside PGG 15 C2 Translation Of The Original Instructions preview
PGG 15 C2
Brand: Parkside Pages: 104
Savin MLP28 Operating Instructions Manual preview
MLP28
Brand: Savin Pages: 299
Kyocera ECOSYS M6035cdn Operation Manual preview
ECOSYS M6035cdn
Brand: Kyocera Pages: 31
Xerox DocuPrint C2535 A User Manual preview
DocuPrint C2535 A
Brand: Xerox Pages: 120
Ricoh RN-MF1 Service Manual preview
RN-MF1
Brand: Ricoh Pages: 162
MIMAKI UJF-605R II Daily Care Manual preview
UJF-605R II
Brand: MIMAKI Pages: 28

Brands by name

Popular brands

Load more brands