manualshive.com logo in svg

Xerox WorkCentre 7300 Series, Administrator'S Manual

The Xerox WorkCentre 7300 Series Troubleshooting Manual is a comprehensive user resource designed to address any issues you may encounter with this exceptional product. This manual can be easily downloaded for free from manualshive.com, ensuring prompt resolution for any technical difficulties you may experience.

Share
Download
background image

118

9.

If you wish to allow guest access, enter your guest password twice in the boxes provided.

10. Click 

Apply

 and enter the Administrator User name and password when prompted.

11. Click the 

Reboot Machine

 button, then 

OK

, when prompted.

12. Refresh your web browser, then click on the 

User Details Setup

 link to set the Store User Details 

setting.  Note that you can set either NVM or hard disk as the destination for saved authentication 
information.  User Details Setup also allows you to configure the characteristics of the login prompt for 
User Authentication.

Configure communications between the Accounting server and the device

Refer to the remote Accounting server manufacturer's documentation for the specific procedures to follow 
to configure communications between the server and the multifunction device.

The server will contact the device based upon Accounting service parameters set up at the server, such as 
the device's IP address and polling frequency.

Required network communications and server settings will be stated by the server's manufacturer.

Sample list of set up requirements for Equitrac's Accounting service

•

Enable TCP/IP and HTTP on the multifunction device.

•

Set up a static or reserved DHCP IP address for the device.

•

Enable TCP/IP port 80 communications at the device.

•

Download the Controller Interface for Xerox from the Equitrac™ web site.

•

Install the Controller Interface for Xerox at the server.

•

Verify that you have purchased a license for the Controller Interface for Xerox, as well as a license for 
each device communicating with the server.

•

Register each multifunction device at the server (using the device's IP address for identification).

Enable the Accounting option in workstation print drivers

Use the Windows Add Printer dialogs to add the multifunction device's print driver to individual, networked 
workstations.  For instructions, if needed, refer to the Print Drivers section of this guide.

In the print driver default setting dialogs, locate and then enable the Accounting option.  This step assures 
that print jobs from individual workstations will be recognized by the authentication system, rather than 
being unrecognized and deleted by the multifunction device.

For Windows operating systems, the default setting dialogs are accessed by right mouse clicking on the 
printer's icon in the Printers window for Windows 2000, or the Printers and Faxes window for Windows XP.  
Select 

Properties

 from the displayed menu, then locate and enable the Accounting option.

Summary of Contents for WorkCentre 7300 Series












































































































































































































Reviews:

No comments

Related manuals for WorkCentre 7300 Series

Canon iR3245 Troubleshooting Manual preview
iR3245
Brand: Canon Pages: 300
Canon iR3245 Network Manual preview
iR3245
Brand: Canon Pages: 288
Canon iR3245 User Manual preview
iR3245
Brand: Canon Pages: 58
Canon iR1510 Quick Start Manual preview
iR1510
Brand: Canon Pages: 30
Oce sx1481 User Manual preview
sx1481
Brand: Oce Pages: 192
Oce OP20 Operation Manual preview
OP20
Brand: Oce Pages: 22
Oce FX3000 SERIES Quick Setup Manual preview
FX3000 SERIES
Brand: Oce Pages: 41
Oce fx2081 Installation Manual preview
fx2081
Brand: Oce Pages: 28
Oce im5530 Specifications preview
im5530
Brand: Oce Pages: 6
QMS 2560 Options Installation preview
2560
Brand: QMS Pages: 104
Oce im2330 Printing Manual preview
im2330
Brand: Oce Pages: 386
Oce im2330 Specifications preview
im2330
Brand: Oce Pages: 2
Oce cm2520 Safety Information & Getting Started preview
cm2520
Brand: Oce Pages: 27
Oce im2330 Operator'S Manual preview
im2330
Brand: Oce Pages: 324
TE Connectivity T3212 Quick Start Manual preview
T3212
Brand: TE Connectivity Pages: 2
TE Connectivity T3200 Replacement Instructions preview
T3200
Brand: TE Connectivity Pages: 2
Canon PIXMA MP810 User Manual preview
PIXMA MP810
Brand: Canon Pages: 2
Canon PIXMA MX300 Install Manual preview
PIXMA MX300
Brand: Canon Pages: 2

Brands by name

Popular brands

Load more brands