173
Configure IPP
1.
Open your Web browser and enter the TCP/IP address of the Device in the Address or Location field.
Press
Enter
.
2.
Click the
Properties
tab.
3.
Click the plus (+) symbol to the left of
Connectivity
, then the
Protocols
file folder.
4.
Select
IPP
in the directory tree.
5.
The available selections include:
Port Number Static Display, with a default value of 631. This is the port number assigned by IANA
(Internet Assigned Numbers Authority.
Additional Port Number entry box. You can enter port 80 (HTTP) here as a backup port.
A TBCP Filter checkbox (displayed when PostScript is enabled).
Administrator Mode checkbox. This is disabled by default. Consult the On-Line Help for use of this
feature.
DNS checkbox.
Connection Time-out entry box.
6.
Verify that the
DNS
checkbox is checked (enabled) by default. If enabled, the DNS Server will be
available to resolve Host Names to IP Addresses, in support of printing with IPP.
7.
Enter a
Connection Time Out
value for jobs being sent to the Device through this Port. This is the
length of time that the Controller will wait for an end of job command before printing the current job.
8.
Click the
Apply
button to accept changes, or the Undo button to return settings to their previous
values. Note: Setting changes are not applied until you restart the Device. There is a convenient
Reboot Machine
button on the Status tab of Internet Services.
Modify the HTTP (Internet Services) Settings
1.
Open your Web browser and enter the TCP/IP address of the Device in the Address or Location field.
Press
Enter
.
2.
Click the
Properties
tab.
3.
Click the plus symbol (+) to the left of
Connectivity
, then the
Protocols
file folder.
4.
Select
HTTP
in the directory tree.
5.
The available selections include:
Port Number entry box. The default value is Port 80, which is the HTTP Port number assigned by the
IANA (Internet Assigned Numbers Authority). This default value should not need to be changed.
Maximum Connections entry box.
Connection Time-out entry box.
Secure HTTP (SSL) checkbox
– To be enabled only when you wish to set all HTTP communications
with the device to encrypted communications. If you do this you will have to have a digital certificate
installed on the device, as stated in the
Security – Encryption section
of this guide.
Secure HTTP Port Number
– HTTP traffic will be routed to this port when using HTTP with SSL
encryption.
6.
In the
Maximum
Connections
entry box, accept the default value, or enter a number for the maximum
number of hosts (networked workstations) that can be connected to the Device's HTTP Server
(Internet Services web pages) at one time.
7.
In the
Connection Time-Out
entry box, accept the default value, or enter the number of seconds that
a browser connection can remain open without any activity.
Summary of Contents for WorkCentre 7300 Series
Page 1: ...System Administrator s Guide 701P47983 WorkCentre 7300 Series ...
Page 12: ...x ...
Page 203: ......
