Xerox WorkCentre 7300 Series Administrator'S Manual Download Page 74 | Manualshive

Page: 74 / 203

Xerox WorkCentre 7300 Series Administrator'S Manual Download Page 74

62

b.

Select

SMTP Server Settings

and then set the following items for the SMTP server.

[SMTP Server Port Number]

Enter a value in the range from 1 to 65535. The default is 25.

If [POP3] has been selected for the [Mail Receiving Protocol]

a.

From the Connectivity & Network Setup list, select

Outgoing/Incoming

(i.e. E-mail Send/Receive

Settings).

b.

Select

POP3 Server Settings

and then set the following items for the POP3 server.

[POP3 Server Name/Address]

Enter the POP3 Server Name/IP Address and press

Save

.

Note: Enter the address in the format “xxx.xxx.xxx.xxx”. The “xxx” should be a numeric value in the
range from 0 to 255. However, 224 - 255.xxx.xxx.xxx and 127.xxx.xxx.xxx cannot be used.

[POP3 Server Port Number]

Enter a value in the range from 1 to 65535. The default is 110.

Note: Do not use the numbers of any other ports.

[POP3 Server Check Interval]

Set the interval for checking the e-mail on the POP3 server.

[POP3 Server Login Name]

Enter the name to log in to the POP3 server and press

Save

.

[POP3 Server Password]

Enter the same password twice in the [New Password] and [Re-enter Password]. If you do not set
the password, leave it blank and select

Save

.

[POP3 Password Encryption]

Select

On (APOP)

to encrypt the password, if desired.

c.

Select

Save

and then press

Close

.

4.

Set the protocol for sending E-mail.

a.

From the Connectivity & Network Setup list, select

Outgoing/Incoming

, then select

SMTP Server

Settings

, and set the following items for the SMTP server.

[SMTP Server Name/Address]

Enter the SMTP Server Name/IP Address and press

Save

.

Note: Enter the address in the format “xxx.xxx.xxx.xxx”. The "xxx" should be a numeric value in the
range from 0 to 255. However, 224 - 255.xxx.xxx.xxx and 127.xxx.xxx.xxx cannot be used.

[SMTP Server Port Number]

Enter a value in the range from 1 to 65535. The default is 25.

Note: This configuration is not necessary if [SMTP] has been selected for the [Mail Receiving
Protocol] and has already been configured.

[E-mail Send Authentication]

Select one from [Off], [POP before SMTP], or [SMTP AUTH].

Tip:

If you are having trouble

sending E-mail, to see if Authentication is the problem, set this item to

Off

and set the SMTP

Server IP Address (above) to a server that does not require authentication.

Note: If [POP before SMTP] is selected, the POP3 settings must be set.

«
...
72
73
74
75
76
...
»

Summary of Contents for WorkCentre 7300 Series












































































































































































































Reviews:

No comments