128
To Enable Print Color Access Control
This process will restrict a user from printing in color unless they are authorized to do so via the Active
Directory group.
1.
Click
Start
, click
Control Panel
, double-click
Printers and Faxes
, then right-click the printer to be
enabled. In the printer pop-up menu, click
Properties
.
The
Properties
dialog box opens.
2.
In the
Properties
dialog box, click the
Options
tab.
3.
On the
Options
tab, in the
Options Settings
area, click the
Predefined Configurations
folder.
4.
In the the
Predefined Configurations
area, click the
Color Access Control
field and click
Enabled
.
5.
Click the
Color Access Group
field and type or enter the color access group name.
6.
Click
Apply
, then click
OK
.
Note: On the client side, if the user that installs the print driver is a member of the group given
permission to print in color, then the Output Color option within the driver will be selectable between
Color and Black and White. If the user does not have permission to print in color, then the Output Color
option within the driver will list Black and White and is not selectable.
802.1X Authentication
The multifunction device supports 802.1X authentication based on the Extensible Application Protocol
(EAP). 802.1X can be enabled for devices connected through both wired and wireless Ethernet networks.
As described here, the 802.1X configuration is used to authenticate the multifunction device, rather than
individual users. After the device has been authenticated, it will be accessible to users on the network.
The administrator can configure the machine to use one EAP type. EAP types currently supported on the
device are:
EAP-MD5
PEAPv0/EAP-MS-CHAPv2
EAP-MS-CHAPv2
Information Checklist
Create a user name and password on your authentication server which will be used to authenticate the
Xerox device.
Ensure your 802.1Xx authentication server and authentication switch are available on the network.
Configure 802.1X with Internet Services
1.
Open your Web browser and enter the TCP/IP address of the machine in the Address or Location field.
Press
Enter
.
2.
Click the
Properties
tab.
3.
Select the
Security
folder.
4.
Select the
802.1X
link.
5.
Select (place a checkmark in) the
Enabled
box.
6.
Select the required
Authentication Method
.
7.
Enter the
User Name
and
Password
required by your authentication switch and server.
8.
Click
Apply
.
9.
If prompted, enter the administrator user name and password. The 11111 and x-admin.
Summary of Contents for WorkCentre 7300 Series
Page 1: ...System Administrator s Guide 701P47983 WorkCentre 7300 Series ...
Page 12: ...x ...
Page 203: ......
