12
Changing the Administrator Password
There are two Administrator Passwords that control access to the Device's feature settings. One
password is a numeric password (login ID) that controls access through the Device's Control Panel. The
second password is an alphanumeric password (pass code) that controls access through the Device's
Internet Services (embedded HTTP server application residing in the Device).
To Change the Numeric Password on the Device's Control Panel
1.
Press the
Log In / Out button
on the Control Panel.
2.
Press the
"1" key
on the numeric keypad five consecutive times. This is the factory default
"password."
3.
Press
Enter
on the touch screen.
4.
Press the
Machine Status button
on the Control Panel.
5.
Press the
Tools tab
.
6.
Press the
Authentication/Security Settings
.
7.
Press
System Administrator Settings
.
8.
Press
System Administrator Login ID
.
9.
On the Login ID screen, select the
On
button.
Note: If you select the Off button, you cannot access the password setting or password changing
functions.
10. Press the keyboard button, and use the displayed keyboard to enter in a new numeric Login ID ranging
from 1 to 32 characters in length.
11. Press the
Save
button.
12. Press
Next
, then press the keyboard button.
13. Use the displayed keyboard to enter in your new numeric Login ID a second time and press
Save
again.
14. Press
Save
on the Login ID screen to save the new Login ID.
15. If necessary, to exit the System Administrator Settings screen, press the rectangular
Close
button in
the upper right corner of the screen.
16. Wait several seconds and the Auto Clear service should log you out.
Summary of Contents for WorkCentre 7300 Series
Page 1: ...System Administrator s Guide 701P47983 WorkCentre 7300 Series ...
Page 12: ...x ...
Page 203: ......
