30
Port Status (EtherTalk Enablement)
1.
On the EtherTalk selection menu, press the selection line labeled
Port Status
.
2.
Press the
Change Settings
button.
3.
On the Port Status screen, note which of the two buttons is highlighted as the current setting for
EtherTalk Enablement. The available settings are Enabled or Disabled. To print with EtherTalk, this
setting must be
Enabled
.
4.
To change settings, press your setting of choice, then press the
Save
button.
5.
To exit the screen, without making any changes, press the
Cancel
button.
Exiting the EtherTalk Selection Menu
To exit the EtherTalk selection menu, which returns you to the Port Settings menu, press the rectangular
Close
button in the upper right corner of the touch screen.
Exiting the Port Settings Menu and returning to the Tools tab screen
1.
To exit the Port Settings menu, returning to the Tools tab screen, press the rectangular
Close
button in
the upper right corner of the Port Settings menu screen.
2.
Wait several seconds for the Auto Clear service to log you out.
Note: If you changed any settings in the Port Settings menu, the Device will automatically reboot to
register and enable your new settings.
Configuring EtherTalk Settings with Internet Services
1.
Open your Web browser and enter the TCP/IP address of the Device in the Address or Location field.
Press
Enter
.
2.
Click the
Properties
Tab.
3.
Click the plus (+) symbol to the left of
Connectivity
, then the
Protocols
file folder.
4.
Select
AppleTalk (EtherTalk)
in the directory tree.
Note: If this selection is unavailable, click on the Port Status hot link, check the EtherTalk box, then
click Apply.
5.
The available selections include:
Printer Name.
Zone Name.
6.
Enter the name that you wish to assign to this Printer. This is the name that will appear in the
Chooser.
7.
Either accept the default zone of
*
which lets the closest router assign the Device to a zone, or assign
the Device to a zone (with a 32 character naming limit).
8.
Click the
Apply
button to accept changes, or the
Undo
button to return settings to their previous
values. Note: Setting changes are not applied until you restart (reboot) the Device.
Summary of Contents for WorkCentre 7300 Series
Page 1: ...System Administrator s Guide 701P47983 WorkCentre 7300 Series ...
Page 12: ...x ...
Page 203: ......
