manualshive.com logo in svg

Xerox WorkCentre 7300 Series, Administrator'S Manual

The Xerox WorkCentre 7300 Series Troubleshooting Manual is a comprehensive user resource designed to address any issues you may encounter with this exceptional product. This manual can be easily downloaded for free from manualshive.com, ensuring prompt resolution for any technical difficulties you may experience.

Share
Download
background image

89

Scan to PC (FTP/SMB)

Overview

This feature is designed to convert scanned data to TIFF, JPEG, or PDF format, and then use the FTP or 
SMB protocol to send the data to a computer (server or workstation) on the network.

Notes:

It is assumed that you purchased the Scanning option to enable Scanning to FTP/SMB with your 
Device.  If you did not, contact your Xerox Representative to purchase this option.

For scanning to SMB, make sure that a shared folder is created for saving scanned data on the 
network.

For scanning to FTP, make sure that the server is running the FTP service and that you have created 
a directory within the FTP root to be used as a scan filing location.

Requirements for FTP

When using FTP transmission, one of the following FTP servers, with an account on that server (login 
name and password), is required.

•

Microsoft Windows Server 2003

FTP service of Microsoft Internet Information Server 6.0

•

Microsoft Windows 2000 Server, Microsoft Windows 2000 Professional, or Microsoft Windows XP

FTP service of Microsoft Internet Information Server 3.0 or later

•

Mac OS X

FTP service of Mac OS X 10.1.5/10.2.x/10.3.8/10.3.9/10.4.2

Refer to the manual provided with the software for how to configure the FTP service.

Requirements for SMB

When using SMB transmission, a computer running one of the following Operating Systems, which 
includes a shared folder, is required.

•

Microsoft Windows 2000

•

Microsoft Windows Server 2003

•

Microsoft Windows XP

Summary of Contents for WorkCentre 7300 Series












































































































































































































Reviews:

No comments

Related manuals for WorkCentre 7300 Series

JCM GEN5 Series Operation And Maintenance Manual preview
GEN5 Series
Brand: JCM Pages: 70
Xerox DocuColor 1632 Printing User Manual preview
DocuColor 1632
Brand: Xerox Pages: 130
Xerox Phaser 6500 Service Manual preview
Phaser 6500
Brand: Xerox Pages: 793
Canon LBP1760P Service Manual preview
LBP1760P
Brand: Canon Pages: 394
SATO MN-4203 Specifications preview
MN-4203
Brand: SATO Pages: 2
Quest Payment Systems Donation Point Even Quick Start Manual preview
Donation Point Even
Brand: Quest Payment Systems Pages: 2
Oce TCS500 User Manual preview
TCS500
Brand: Oce Pages: 306
Printek VehiclePro 420 Operator'S Manual preview
VehiclePro 420
Brand: Printek Pages: 31
Evolis KU10E User Manual preview
KU10E
Brand: Evolis Pages: 45
Olivetti PR2 E Service Manual preview
PR2 E
Brand: Olivetti Pages: 149
NBS Technologies Advantage M8 Operation Manual preview
Advantage M8
Brand: NBS Technologies Pages: 64
Genicom Intelliprint cL160 User Manual preview
Intelliprint cL160
Brand: Genicom Pages: 216
Lexmark J 110 Appletalk Manual preview
J 110
Brand: Lexmark Pages: 13
Xerox 8560MFPD - Phaser Multifunction Printer Color Laser Evaluator Manual preview
8560MFPD - Phaser Multifunction Printer Color Laser
Brand: Xerox Pages: 20
Xerox WorkCentre 7970 System Administrator Manual preview
WorkCentre 7970
Brand: Xerox Pages: 268
Rimage Everest 600 User Manual preview
Everest 600
Brand: Rimage Pages: 217
Oki C7400 Maintenance Manual preview
C7400
Brand: Oki Pages: 174
Oki MAC TECHNICAL REFERANCE C7350 User Manual preview
MAC TECHNICAL REFERANCE C7350
Brand: Oki Pages: 95

Brands by name

Popular brands

Load more brands