![background image](http://html1.mh-extra.com/html/xerox/workcentre-7300-series/workcentre-7300-series_administrators-manual_884507014.webp)
2
Some Network Environment settings can only be configured through use of Internet Services. Also,
nearly all of the services, ports, and protocols that can be configured at the Device can be
configured with Internet Services
running on a networked workstation. If Internet Services is shown as
"disabled" on the Configuration Report, refer to the Enable Internet Services (HTTP) topic in this guide.
If you will be using SNMP Management software with this device, refer to the
SNMP Configuration
topic
and follow the instructions supplied.
If you will be using the Parallel Port and wish to view or change its configuration, refer to the
Parallel Port
Configuration
topic and follow the instructions supplied.
Step 5.
Go to the NOS Selection section of this guide, then select your Network Operating System for
Device installation instructions specific to your network environment. If you will be installing the Device in
a Client/Server environment, make sure to have your Server's Operating System Manual available to refer
to when required.
Step 6.
Go to the
Print Drivers
section of this guide for the instructions required to set up individual
desktop workstations to communicate with the Device.
Step 7.
If you have purchased optional features for your Device, such as Scanning to the Device's Hard
Drive, go to the
Options
section of this guide for configuration instructions.
Note: For comprehensive information on the use of Internet Services as a browser-based, workstation
tool for configuring your Device, go to the Internet Services section of this guide and click on relevant
topics from the menu list.
Xerox Unicode 3.0 for SAP Font Kit
A Unicode font kit is available for this multifunction device. Installation of the Unicode fonts, per the kit’s
instructions, provides the required character sets to print documents in multiple languages, in an SAP
printing environment. To order the kit, contact your Xerox representative.
Configuration Report
To print a Configuration Report, with the Device switched
ON
, perform the following steps:
1.
Press the
Machine Status button
.
2.
Press the
Print Reports button
.
3.
Press the
Copy Reports button
.
4.
Press the
Configuration Report button
.
5.
Press the large, green,
Start button
, located to the immediate right of the Control Panel’s numeric
keypad.
6.
The printing process will be graphically displayed on the touch screen. Upon receipt of the
Configuration Report, note that the multi-page print is formatted into two columns with horizontal ruled
lines indicating four distinct data display areas on the print.
•
The first area displays System Settings.
•
The second area displays Copy Service Settings.
•
The third area displays Print Service Settings.
•
The fourth area displays Communication Settings.
Summary of Contents for WorkCentre 7300 Series
Page 1: ...System Administrator s Guide 701P47983 WorkCentre 7300 Series ...
Page 12: ...x ...
Page 203: ......