85
•
Starting Rate – Select G3 Auto or Forced4800bps.
•
Delayed Start – Start Time. This can be a useful feature for saving time-based phone charges.
•
Transmission Header Text. Select On or Off. This adds the sender name and phone number to
faxes.
•
Confirmation Options. Select On or Off. If set to On a report will print when transmission
completes successfully.
•
Delivery Receipts/Read Receipts.
•
IFax Profile.
•
Ifax Subject.
8.
Touch
Close
until the Fax Mode Settings selections are again displayed.
9.
Touch
Fax Control
.
10. Select the Line to enter or change, then touch
Change Settings
. Touch
Save
to save any new
settings.
•
Re-enter Recipients
•
Re-enter Broadcast Recipients
•
Re-enter Speed Dial Recipients
•
Transmission Header Text – Polling. You can leave this setting at its default value.
•
Documents for Polling – Auto Delete. Set as desired to delete documents from Mailboxes after
polling same.
•
Rotate 90 degrees.
•
Sender ID.
•
Save Undelivered Faxes.
•
Save Deleted Faxes.
•
Saved Faxes – Auto Delete.
•
Transmission Interval.
•
Batch Send.
•
Manual Send/Receive Default. Select the default setting for manual Fax operations.
•
Fax Receiving Mode. Leave this setting at Auto Receive for unattended operation.
•
Border Limit.
•
Auto Reduce on Receipt.
•
Tray for Printing Incoming Faxes.
•
2 Pages up on Receipt.
•
2 Sided Print.
•
Edge Erase – Top & Bottom Edges.
•
Edge Erase – Left & Right Edges.
•
Reduce 8.5x11 Original to A4.
•
Pseudo-Photo Gradation Mode
•
Box Selector - Line Setup. Enable this setting to enable Fax Mailboxes to receive incoming faxes.
•
Memory Full Procedure.
•
Maximum Stored Pages.
Summary of Contents for WorkCentre 7300 Series
Page 1: ...System Administrator s Guide 701P47983 WorkCentre 7300 Series ...
Page 12: ...x ...
Page 203: ......
