manualshive.com logo in svg

Xerox WorkCentre 7300 Series, Administrator'S Manual

The Xerox WorkCentre 7300 Series Troubleshooting Manual is a comprehensive user resource designed to address any issues you may encounter with this exceptional product. This manual can be easily downloaded for free from manualshive.com, ensuring prompt resolution for any technical difficulties you may experience.

Share
Download
background image

i

Table of Contents

Network Connectivity ................................................................................................................................ 1

Installation Steps  ................................................................................................................................... 1

Xerox Unicode 3.0 for SAP Font Kit ...................................................................................................... 2

Configuration Report ............................................................................................................................. 2
Ethernet Speed Setting   ........................................................................................................................ 3

To Change the Network Speed ............................................................................................................. 3

Go to your Device .............................................................................................................................. 3

Enable Internet Services (HTTP)   ......................................................................................................... 4

To access Internet Services Settings at the Device .............................................................................. 4
Internet Services (HTTP) Enablement .................................................................................................. 4

Internet Services Port Number  ......................................................................................................... 5
Exiting the Internet Services Selection Menu .................................................................................... 5
Exiting the Port Settings Menu and returning to the Device's Tools tab screen ................................ 5

Proxy Server Settings ............................................................................................................................ 6
Parallel Port Configuration   .................................................................................................................. 7

To access Parallel Port Settings at the Device ..................................................................................... 7
Port Status (Parallel Port Enablement) ................................................................................................. 7
Print Mode ............................................................................................................................................. 8
PJL (Printer Job Language) Setting ...................................................................................................... 8
Auto Eject time (Parallel Port Timeout) ................................................................................................. 8
Bi-Directional Communications  ............................................................................................................ 8

Input to Prime  ................................................................................................................................... 9
Exiting the Parallel Port Selections Menu.......................................................................................... 9
Exiting the Port Settings Menu and returning to the Device's Tools tab screen ................................ 9

USB Configuration.................................................................................................................................. 9
SNMP Configuration   ........................................................................................................................... 10

To access SNMP Settings at the Device............................................................................................. 10
Port Status (SNMP Enablement)......................................................................................................... 10

Exiting the SNMP Selection Menu................................................................................................... 10
Exiting the Port Settings Menu and returning to the Device's Tools tab screen  ............................. 11

Configuring SNMP Community Names with Internet Services............................................................ 11

Changing the Administrator Password   ............................................................................................ 12

To Change the Numeric Password on the Device's Control Panel ..................................................... 12
To Change the Alphanumeric Password used by Internet Services ................................................... 13

Setting the Auto Clear Timer  .............................................................................................................. 14
Add or Remove All Services Screen Buttons .................................................................................... 14

Rearrange Icons.................................................................................................................................. 15

Smart eSolutions (Meter Assistant and Supplies Assistant)............................................................ 15
Machine Software Upgrades................................................................................................................ 16

Prepare for the upgrade ...................................................................................................................... 16
At your workstation.............................................................................................................................. 17

NOS Selection .......................................................................................................................................... 18

TCP/IP Protocol Configuration  ........................................................................................................... 18

To access the TCP/IP Protocol Settings at the Device ....................................................................... 18

Ethernet Setting (Ethernet Rated Speed)  .......................................................................................18
TCP/IP – IP Mode............................................................................................................................ 18
IP Address Resolution  .................................................................................................................... 19
IPv4 IP Address ............................................................................................................................... 19
IPv4 Subnet Mask............................................................................................................................ 19
IPv4 Gateway Address .................................................................................................................... 19
IPv4 IP Filter (IP Address Restriction)  ............................................................................................ 20
Exiting the Protocol Settings Menu and returning to the Device's Tools tab screen ....................... 20

Summary of Contents for WorkCentre 7300 Series












































































































































































































Reviews:

No comments

Related manuals for WorkCentre 7300 Series

YOUPAI MAX Product Instruction Manual preview
MAX
Brand: YOUPAI Pages: 15
TallyGenicom 5040 Quick Start Manual preview
5040
Brand: TallyGenicom Pages: 15
Dascom TALLY MIP480 User Manual preview
TALLY MIP480
Brand: Dascom Pages: 138
Dascom T2150 User Manual preview
T2150
Brand: Dascom Pages: 166
Xerox 4520 User Manual preview
4520
Brand: Xerox Pages: 310
Oce im4511 Operation Manual preview
im4511
Brand: Oce Pages: 8
Canon PIXMA MG4120 Getting Started Manual preview
PIXMA MG4120
Brand: Canon Pages: 4
Partner RP-330 Technical Manual preview
RP-330
Brand: Partner Pages: 81
Tally T8024 User Manual preview
T8024
Brand: Tally Pages: 266
Xerox AltaLink B8045 Security Manual preview
AltaLink B8045
Brand: Xerox Pages: 70
Lexmark X850E - Mfp Setup Manual preview
X850E - Mfp
Brand: Lexmark Pages: 57
Oki C7350n User Manual preview
C7350n
Brand: Oki Pages: 187
Brady BradyPrinter A5500 User Manual preview
BradyPrinter A5500
Brand: Brady Pages: 72
Xerox WorkCentre 7970 System Administrator Manual preview
WorkCentre 7970
Brand: Xerox Pages: 268
InfoPrint Color 1824 User Manual preview
Color 1824
Brand: InfoPrint Pages: 170
Xerox Nuvera 100 MX Brochure preview
Nuvera 100 MX
Brand: Xerox Pages: 4
Boley GraverMach AT Operation And Maintenance Manual preview
GraverMach AT
Brand: Boley Pages: 20
Canon LBP228x Getting Started preview
LBP228x
Brand: Canon Pages: 32

Brands by name

Popular brands

Load more brands