manualshive.com logo in svg

Xerox DocuPrint C2255, User Manual

The Xerox DocuPrint C2255 is a high-performance printer that guarantees fast and efficient document printing. To help users easily navigate its features, a free and downloadable Quick Reference Manual is available for instant access at manualshive.com. This comprehensive manual will guide you through every aspect of the printer's functionality and maximize its performance.

Share
Download
background image

6.6 Error Messages and Error Codes

187

Paper Jam 
Open Cover A, 
pull Lever A1 and 
pull paper up 

A paper jam occurred in the printer. 
Open cover A and pull lever A1. After confirming the location of the paper jam, 
remove the jammed paper. 

Refer to

• “6.1 Clearing Paper Jams” (P. 172)

Paper Jam 
Open Cover X and 
remove paper
(X: A, B or C)

A paper jam occurred in the printer. 
Open the indicated cover. After confirming the location of the paper jam, remove the 
jammed paper. 

Refer to

• “6.1 Clearing Paper Jams” (P. 172)

Paper Jam 
Pull out Tray N 
and remove paper. 
Check or adjust 
Paper Guides.
(N: Whichever from 1 to 4) 

A paper jam occurred in the printer. 
Pull out tray N and remove the jammed paper. Next, check that the tray's paper 
guides are positioned correctly. 

Paper Jam 
Remove paper in 
Tray 5 (Bypass) 
and reload

A paper jam occurred in the bypass area. 
Removed the jammed paper from the bypass tray. Next, load the paper into the 
bypass tray again. 

Refer to

• “6.1 Clearing Paper Jams” (P. 172)

Ready to print
             ***-***

There may be something wrong with the printer. 
Switch the power off, wait for the display to go out, and switch the power back on 
again. If the same error code reappears, check the error code (***-***) on the display 
and take appropriate action. 

Refer to

• “Error Codes” (P. 190)

Ready to print

Duplicate IPvx

(vx: v4 or v6)

There are duplicate IP addresses. Change the IP address. 

Note

• Pressing the <Information> button will display detailed information on the control 

panel. 

Refer to

• “Setting an IP Address (IPv4)” (P. 30)

Ready to print

Duplicate SMB Host

That SMB host name already exists. 
Change the host name. 

Note

• Pressing the <Information> button will display detailed information on the control 

panel. 

Refer to

• CentreWare Internet Services online help

Ready to print

DNS Update failed

An IP address could not be obtained from the DNS. 
Set the IP address manually. 

Note

• Pressing the <Information> button will display detailed information on the control 

panel. 

Refer to

• CentreWare Internet Services online help

Message

Symptom/Cause/Remedy

Summary of Contents for DocuPrint C2255



































































































































































































































































































































Reviews:

No comments

Related manuals for DocuPrint C2255

ABLE AP1200 Programmer'S Manual preview
AP1200
Brand: ABLE Pages: 26
JCM GEN5 Series Quick Reference Manual preview
GEN5 Series
Brand: JCM Pages: 22
Canon imageRUNNER ADVANCE C5255 Instruction Manual preview
imageRUNNER ADVANCE C5255
Brand: Canon Pages: 64
Canon Powershot A3100 IS Supplementary Manual preview
Powershot A3100 IS
Brand: Canon Pages: 6
Canon imagePROGRAF TC-20 Installation Manual preview
imagePROGRAF TC-20
Brand: Canon Pages: 44
Canon C3226i Getting Started preview
C3226i
Brand: Canon Pages: 88
Oki C650/ES6450 Basic Operation Manual preview
C650/ES6450
Brand: Oki Pages: 180
Muratec MFX-3550 User Manual preview
MFX-3550
Brand: Muratec Pages: 213
Glunz & Jensen NewsWriter XL Operating Manual preview
NewsWriter XL
Brand: Glunz & Jensen Pages: 104
Oki OKIDATA OL400e User Manual preview
OKIDATA OL400e
Brand: Oki Pages: 88
Oki PAGE 14ex User Manual preview
PAGE 14ex
Brand: Oki Pages: 40
TEC B-470-QQ Series Owner'S Manual preview
B-470-QQ Series
Brand: TEC Pages: 32
Xerox WorkCentre XD130DF Specification Sheet preview
WorkCentre XD130DF
Brand: Xerox Pages: 1
Sam4s giant 100 series User Manual preview
giant 100 series
Brand: Sam4s Pages: 54
Sam4s ELLIX50 User Manual preview
ELLIX50
Brand: Sam4s Pages: 24
Oki ES4140dn User Manual preview
ES4140dn
Brand: Oki Pages: 69
Olivetti d-Copia 1801MF Plus Service Manual preview
d-Copia 1801MF Plus
Brand: Olivetti Pages: 492
Oki ES9160 Maintenance Manual preview
ES9160
Brand: Oki Pages: 1087

Brands by name

Popular brands

Load more brands