Xerox DocuPrint C2255 User Manual Download Page 254

Page: 254 / 322

254

7 Maintenance

7.9

Ordering Consumables With Your Web
Browser

You can order consumables for the printer using CentreWare Internet Services.

Launch your web browser and access CentreWare Internet Services.

Note

• If you do not know how to access CentreWare Internet Services, refer to “1.6 Configuring the Printer

Using CentreWare Internet Services” (P. 35).

• If you are prompted to enter the administrator's ID and password, enter them and click [OK].

Click the [Support] tab.

Click the "Order Consumables" link.
Order consumables on the screen that appears.

Note

• To edit the "Order Consumables" link, click the [Change Settings] button and change the settings on the

screen that appears. For more information, refer to the online help provided for CentreWare Internet
Services.

Summary of Contents for DocuPrint C2255


































































































































































































































































































































Search results

Summary of Contents for DocuPrint C2255

Reviews:

Related manuals for DocuPrint C2255

Brands by name

Popular brands

Xerox DocuPrint C2255, User Manual

Search results

Summary of Contents for DocuPrint C2255

Reviews:

Related manuals for DocuPrint C2255

Brands by name

Popular brands