Xerox DocuPrint C2255 User Manual Download Page 130

Page: 130 / 322

130

5 Control Panel Settings

[SNMP]

Note

• SNMP must be configured when using an application to remotely manage multiple printers. SNMP

manages printer information and provides it to the management application.

[TCP/IP Settings]

Network/Port
SNMP

SNMP
Port Status

SNMP
TransportProtocol

Setting

Description

Port Status

Sets whether to enable or disable the SNMP port at printer start-up.
• [Enabled] (default)
• [Disabled]

Important

• If the printer runs out of memory when the port is enabled, the port is

sometimes automatically disabled. If this happens, either disable unused
ports, or change the memory allocation under [Allocate Memory].

TransportProtocol

Sets the protocol of the transport layer used by SNMP. Either or both of IPX
and UDP can be selected.
• [UDP] (default)
• [IPX]
• [IPX,UDP]

Note

• When using UDP protocol, both the printer and client computers must have

IP addresses.

• To determine which protocol (IPX or UDP) to use, refer to the manual

supplied for the application.

Network/Port
TCP/IP Settings

TCP/IP Settings
IP Mode

TCP/IP Settings
IPv4 Settings

IPv4 Settings
Get IP Address

IPv4 Settings
IP Address

IPv4 Settings
Subnet Mask

IPv4 Settings
Gateway Address

Summary of Contents for DocuPrint C2255


































































































































































































































































































































Search results

Summary of Contents for DocuPrint C2255

Reviews:

Related manuals for DocuPrint C2255

Brands by name

Popular brands

Xerox DocuPrint C2255, User Manual

Search results

Summary of Contents for DocuPrint C2255

Reviews:

Related manuals for DocuPrint C2255

Brands by name

Popular brands