Xerox DocuPrint C2255 User Manual Download Page 128

Page: 128 / 322

128

5 Control Panel Settings

[UPnP]

Port Number

Sets the port number from 1 to 65535.
• [9100] (default)

Note

• Set only unique port numbers.

TBCP Filter

Sets whether to enable or disable the TBCP filter during processing of
PostScript data.
• [Disabled] (default)
• [Enabled]

Network/Port
UPnP

UPnP
Port Status

UPnP
Port Number

Setting

Description

Port Status

Sets whether to enable or disable the UPnP port at printer start-up.
• [Enabled]
• [Disabled] (default)

Important

• If the printer runs out of memory when the port is enabled, the port is

sometimes automatically disabled. If this happens, either disable unused
ports, or change the memory allocation under [Allocate Memory].

Port Number

Sets the port number from 1 to 65535.
• [80] (default)

Note

• Set only unique port numbers. Note, however, that InternetServices/IPP/

SOAP/UPnP/WSD ports and Internet services that use HTTP protocol can
share the same port number.

Setting

Description

Summary of Contents for DocuPrint C2255


































































































































































































































































































































Search results

Summary of Contents for DocuPrint C2255

Reviews:

Related manuals for DocuPrint C2255

Brands by name

Popular brands

Xerox DocuPrint C2255, User Manual

Search results

Summary of Contents for DocuPrint C2255

Reviews:

Related manuals for DocuPrint C2255

Brands by name

Popular brands