![background image](http://html2.mh-extra.com/html/xerox/docuprint-4635/docuprint-4635_operators-manual_4072836095.webp)
SYSTEM CONTROL TASKS
Figure 4-11.
Attention Light/Alarm window
2. Select the appropriate Enabled button to enable the:
•
Steady Attention light
•
Flashing Attention light
•
Alarm
Select the appropriate Disabled button to disable the:
•
Steady Attention light
•
Flashing Attention light
•
Alarm
3. Select the appropriate header button:
•
Apply/Close. Apply your selection and close the window.
•
Apply. Apply your selection.
•
Close. Close the window.
Attention Light/Alarm task through
command line
•
To enable the Attention light, enter the following command:
ATTENTION LIGHT ENABLE [STEADY|FLASHING]
STEADY
Enables only the steady mode of the Attention
light.
FLASHING
Enables only the flashing mode of the
Attention light.
•
To disable the Attention light, enter the following command:
ATTENTION LIGHT DISABLE [STEADY|FLASHING]
STEADY
Disables the steady mode of the Attention
light.
FLASHING
Disables the flashing mode of the Attention
light.
•
To enable the alarm, enter the following command:
ATTENTION ALARM ENABLE {0-10}
0-10 Sets the tone volume for the alarm. 0 is softest, 10 is
loudest volume.
•
To disable the alarm, enter the following command:
ATTENTION ALARM DISABLE
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
4-11