JOB CONTROL TASKS
Abort task through command line
•
To remove a specific print job from the system, enter the
following command:
ABORT job-id
job-id
The name of the job you want to abort.
•
To cause the current job to stop printing, enter the following
command:
ABORT O
•
To remove the print job currently being input into the
system, enter the following command:
ABORT I
•
To abort a nonprint task (such as FDL or PDL), enter the
following command:
ABORT
Note: For this command to work, there must be no print
jobs active at the time it is entered. If there is an active print
job, the following message appears:
OS1190 INVALID PARAMETER, COMMAND IGNORED
Reset
When the Reset task is used:
•
All print jobs are removed from the job queue.
•
Any pages in the printer paper path are sent to the selected
stacker bin.
•
All processing activity ceases, including accounting.
•
If your LPS is operating online to a host computer, all jobs in
the system need to be resent from the host.
Therefore, the Reset task should not be used if the Abort task
can be used instead.
•
If the system is idle when the Reset task is selected, a
message appears informing you that the system has been
reset and is ready for another request.
•
If the system is not idle, a message appears asking you to
confirm the clearing of the job queue.
Reset task through windows
Select “Reset” from the Job Control menu. A confirmation
window appears.
Figure 5-3.
Confirmation window (Reset option)
5-4
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE