SYSTEM OVERVIEW OF THE 4635 LASER PRINTING SYSTEM
High-capacity stacker bins
The 4635 LPS contains up to four high-capacity stacker (HCS)
bins as part of the feeder/stacker modules (stacker bins A, B, C
and D). Refer to the section “Optional printer components“ for
more information on the optional feeder/stacker modules.
Figure 1-8.
HCS bins
Each HCS can hold 2500 sheets of 20 pound/75 gsm paper. The
paper can be stacked onto the bin platform, a container on top
of the bin platform, or a pallet without its container (for
container sizes 11 by 17 inches or A3 only). The stacking capacity
is approximately 100-150 sheets less when stacking into a
container. (Refer to table 9-1 for information on available
containers.)
It is also possible to select the level to which paper will be
stacked in the HCS. Refer to the “Status and print tasks” chapter
for additional information.
A stacking elevator maintains the paper at the proper level for
stacking and lowers the stack for unloading. There is an offset
mechanism that offsets printed sets toward the front or back of
the HCS bin. Each HCS bin has unlinked double doors to
provide you with easy, yet safe, access for unloading paper from
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
1-7
